RTS DSI 2008 Mode Dip Switch Settings U301, Switch Settings Description, Full-Duplex Definition

Mode Dip Switch Settings U301

S301 controls the operating mode for System B and S302 controls the operating mode for System A.

Settings are summarized as follows:

TABLE 3. Mode DIP Switch Settings for Programmed Chip P/N 90157640500 (version 1.0)

	Switch Settings			Description
1	2	3	4
Open	Open	Open	Open	Configuration 1, Full-Duplex Mode (Default)
Closed	Open	Open	Open	Configuration 2, Half-Duplex Mode
Open	Open	Open	Closed	Configuration 3, Tone Test Mode

Full-Duplex Definition: Both sides of the line can talk simultaneously.

Half-Duplex Definition: Only one side of the line can talk at a time and the other side must wait until the first side is done talking before responding. 4-wire systems have priority over 2-wire system in Half- duplex mode.

Tone Test Mode:Disables internal suppression of tones.

TABLE 4. Mode DIP Switch Settings for Programmed Chip P/N 90157640500 (version 1.1)

		Switch Settings			Description
	1	2	3	4
	Open	Open	Open	Open	Configuration 1, Full-Duplex Mode (Default)
	Closed	Open	Open	Open	Configuration 2, Half-Duplex Mode
	Open	Open	Open	Closed	Configuration 3, Full-Duplex Mode, Noise Suppression Disabled
Full-Duplex Definition:				Both sides of the line can talk simultaneously.
Half-Duplex Definition:				Only one side of the line can talk at a time and the other side must wait until the first side is
				done talking before responding. 4-wire systems have priority over 2-wire system in Half-
				duplex mode.
Noise Suppression:				The unit suppresses background noise in absence of speech. Configuration 3 disables this
				suppression.

20