Selecting moment of switching to next frame
Normally the transmission of screen data is terminated when a frame is displayed on the screen. If the video source switches to a new frame during this display period, horizontal screen breaks may be seen.
Jumper JP3 on the Remote unit’s PC board can be set to change the moment of switching. Remove the cover on the Remote unit and set JP3 accordingly.
Moment to switch | JP3 | Description |
Switch during |
| Higher frame rate but may produce |
HSYNC (default) |
| detectable horizontal breaks |
Switch during |
| Lower frame rate but may produce |
VSYNC |
| stepping pictures (no horizontal breaks) |
CRYSTALVIEW DVI FIBER INSTALLATION AND OPERATIONS MANUAL | 15 |
|
|