Rose electronic Singlemode or Multimode fiber models manual Servide, Service Information

Page 21

SERVIDE

Service Information

Maintenance and Repair

This Unit does not contain any internal user-serviceable parts. In the event a Unit needs repair or maintenance, you must first obtain a Return Authorization (RA) number from Rose Electronics or an authorized repair center. This Return Authorization number must appear on the outside of the shipping container. See Limited Warranty for more information.

When returning a Unit, it should be double-packed in the original container or equivalent, insured and shipped to:

Rose Electronics Attn: RA__________

10707 Stancliff Road Houston, Texas 77099 USA

Technical Support

If you are experiencing problems, or need assistance in setting up, configuring or operating your unit, consult the appropriate sections of this manual. If, however, you require additional information or assistance, please contact the Rose Electronics Technical Support Department at:

Phone: (281) 933-7673

E-Mail: TechSupport@rose.com

Web: www.rose.com

Technical Support hours are from: 8:00 am to 6:00 pm CST (USA), Monday through Friday.

Please report any malfunctions in the operation of this Unit or any discrepancies in this manual to the Rose Electronics Technical Support Department.

CRYSTALVIEW DVI FIBER INSTALLATION AND OPERATIONS MANUAL

17

 

 

Image 21
Contents CrystalView DVI Fiber Page Limited Warranty Models FCC/IC STATEMENTS, EU Declaration of ConformityTable of Contents Introduction DisclaimerSystem introduction Features Package contentsCompatibility Models Models / Connectors Single VideoModels / Connectors Single Video Serial / Audio Rear Models Dual VideoModels Dual Video Serial / Audio Cables CrystalView DVI Fiber to Rose switch cableReceiver to KVM station cable Transmitter unit to Receiver unit cableInstallation InstallationCable type w/ LC connectors Maximum distance Applying powerTransmitter to Receiver cabling Video OK Power Data Error Status Diagnostic LED IndicatorsOperation Operating instructionsDDC Information DDC Source JP1 setting JP2 setting Reset DDC table to default values Color Depth JP3 setting Color Depth Selection Selecting moment of switching to next frame Moment to switchDescription Troubleshooting TroubleshootingMaintenance and Repair Service InformationServide Technical SupportSafety SafetySafety and EMC Regulatory Statements Safety information GroundingServicing Appendices Appendix A. General specificationsAppendix B. Parts and cables Part Number Multimode DescriptionPart Number Singlemode Description Appendix C. Rackmount Kit Page Stancliff Road Phone 281 Houston, Texas