Panduit TDP43H, TDP42H, TDP46H manual CARD-MEMORY Copy Copying

Page 45

CARD->MEMORY

COPY COPYING

CARD->MEMORYCOPY COMPLETED

CARD COPY/FORMAT XXXXXXX ERROR

MEMORY->CARDCOPY

PROGRAM Y/N

COPY START

YES NO

MEMORY->CARDCOPY COMPLETED

CARD COPY/FORMAT XXXXXXX ERROR

CARD FORMAT

YES NO

MEMORY FORMAT

YES NO

PANDUIT TDP4*H

Section 3: Configuration

3.Press the FEED key to accept the selection. If Yes was selected the copy process will start

4.Once the copy process is completed, press the FEED key to step the display.

5.If an error is encountered in the copy process, one of the following messages will be displayed on the second line:

R/W Error

Indicates a Read/Write error occurred

No Card Error

Indicates no card was recognized

Mem Full Error Indicates that there is insufficient memory available.

This selection allows the user to copy the current firmware installed in the printer to a PCMCIA Memory Card.

1.Use the LINE key to step the cursor to desired setting. If Yes is selected, the printer will enter the Card Copy mode. If No is selected, the display will advance to the mode display.

2.Press the FEED key to accept the selection. If Yes was selected the copy process will start. If you select No, the display will return to the previous selection.

3.Once the copy process is completed, press the FEED key to step the display.

4.If an error is encountered in the copy process, one of the following messages will be displayed on the second line:

R/W Error

Indicates a Read/Write error occurred

No Card Error

Indicates no card was recognized

Mem Full Error

Indicates that there is insufficient memory

available.

 

Before a PCMCIA card can be used, it must be formatted.

Note: Formatting a card destroys all data currently stored on the card.

1.Use the LINE key to step the cursor to desired setting. If Yes is selected, the printer will enter the Card Format mode. If No is selected, the display will advance to the mode display.

Before the internal Expanded Memory can be used, it must be formatted.

Note: Formatting the Memory will destroy any stored data.

1.Use the LINE key to step the cursor to desired setting. If Yes is selected, the printer will enter the Memory Format mode. If No is selected, the display will advance to the mode display.

GMTDPH-MAN

Page 3-19

Page 44 Page 46
Image 45
Page 44 Page 46
Contents TDP42H, TDP43H, TDP46H Panduit Corp Configuration InstallationCleaning and Maintenance TroubleshootingOptional Accessories Interface SpecificationsC T I O N Pr i n t e r O v e r v i e w Introduction Specification TDP42H TDP43H TDP46H Print General Printer SpecificationsSpecification Character Fonts Specification TDP42H TDP43H TDP46H Matrix FontsBar Codes SymbologiesPhysical PowerAccessories and Options GMTDPH-MAN Panduit TDP4*H C T I O N Installation Introduction Unpacking and Parts Identification Setting Up the Printer GMTDPH-MAN Panduit TDP4*H Loading Labels and Tags GMTDPH-MAN Panduit TDP4*H Panduit TDP4*H GMTDPH-MAN Loading the Ribbon Panduit TDP4*H GMTDPH-MAN LCD Display Panel Operator PanelOn Line EXT Rear PanelLabel Indexing Sensor SensorsGMTDPH-MAN Panduit TDP4*H RS232 TRANSMIT/RECEIVE Setting DIP Switch PanelsSetting Setting DSW1DSW2 OFF Printer SET UPDSW2-2 Off Cutter Not Used Setting DSW3DSW3 OFF DSW3-6 DSW3-7 Switch Selections Default SettingsSoftware Default Settings Default CompletedPotentiometer Adjustments PitchBackfeed Offset Print DisplayLCD Panel Printer Configuration Normal ModeInitializing Online QTY000000 Offline Print DarknessPrint Speed Pitch Offset +00mm Advanced Mode Cancel Print JOB YES no CompletedInitializing Advanced Mode Zero Slash YES no Auto Online SET Calendar YES no Print OffsetIgnore CR/LF YES no CalendarCard Mode Character Pitch Prop Fixed Advanced ModeCopy Start YES no Panduit TDP4*H CARD-MEMORY Copy Copying CARD-MEMORY Copy Copying Initializing Advanced Mode Service Mode GAPX.XXV INPUTX.XV Service ModeGAPX.XXV INPUTX.XV EYEX.XXV INPUTX.XV Auto Online Feed YES no Feed on Error EXT PIN 9 Select MODE1 MODE2 Euro Code Reprint W/FEED YES no FORWARD/BACKFEED Distance DefaultACK Signal Counters Mode Test Print ModeInitializing Default Setting Mode Initializing Default Setting YES noTest Print Size 10 CM Press Feed KEY to Stop Printing Clear NON-STANDARD Protocol Default Setting CompletedDownload User Defined Protocol Codes Initializing User Download Press the Line KEYHEX Dump Mode User Download WaitingInitializing Online Print Darkness Adjusting the Print QualityPrint Speed Cleaning the Print Head, Platen and RollersCleaning the Platen and Rollers Cleaning the Label Edge SensorsReplacing the Print Head Do not remove the two outside screws painted red Cleaning and Maintenance Initial Checklist Using the IEEE1284 Parallel InterfaceC T I O N Tr o u b l e s h o o t i n g Introduction Using the RS232C Serial Interface Using the Universal Serial Bus USB Interface Using the Lan Ethernet InterfacePrinter does not Come UP Ready Checking the Network Connection and Cabling Intermittent ProblemsLED LCD Message Audible Beep Error Condition Possible Causes GMTDPH-MAN Panduit TDP4*H Interface Types C T I O N T e r f a c e Specification s IntroductionReceive Buffer Single JOB BufferMulti JOB Buffer IEEE1284 Parallel Interface PIN Signal Direction Electrical SpecificationsIEEE1284 Parallel Interface Pin Assignments Data StreamsRS232 Serial Interface General SpecificationsSignal Definition RS232C Interface SignalsPIN Assignments PINCable Requirements READY/BUSY Flow ControlON/X-OFF Flow Control Universal Serial Bus USB Interface Local Area Network LAN Optional InterfaceBi-Directional Communications ENQUIRE/ACK/NAK Cancel canEnquire ENQ Print JOBPrint Start DC1 Print Stop DLEError Handling InstallationC T I O N T i o n a l Ac c e s s o r i e s Introduction Pcmcia Memory CardsPlug-In Interface Modules Error Description Indication RemedyOperator Setup CutterGeneral Operation Label Dispense Option Removing and Unwinding the Roll Label RewinderReal Time Clock

TDP46H, TDP43H, TDP42H specifications

Panduit is a well-respected name in the field of network and cabling solutions, and their TDP series of identification printers, specifically the TDP42H, TDP43H, and TDP46H, showcase advanced technologies that cater to the diverse needs of modern enterprises.

The TDP42H is known for its high-resolution printing capability and versatility, allowing users to print labels in various formats and sizes. This printer employs thermal transfer technology, ensuring that the print quality remains sharp and durable over time. It features a user-friendly interface that allows for quick and easy setup, making it accessible for both seasoned professionals and newcomers alike. One of the standout features of the TDP42H is its ability to produce both indoor and outdoor labels, thanks to its weather-resistant materials, which are ideal for challenging environments.

The TDP43H builds on the strengths of the TDP42H by offering enhanced connectivity options. It supports wireless printing and is compatible with various mobile devices, allowing for seamless operation in a range of settings. Additionally, it has a larger printing area, which allows for more extensive information on each label. This makes it suitable for more complex identification tasks in industrial settings. The TDP43H also incorporates advanced software capabilities, enabling users to design custom labels that meet the specific needs of their projects.

On the other hand, the TDP46H is built for high-volume printing tasks. It boasts a faster printing speed and a higher print resolution compared to its counterparts. This printer is ideal for environments where efficiency and productivity are paramount. The TDP46H features a robust design that can withstand the rigors of frequent use, ensuring reliability in demanding situations. Furthermore, it integrates with various Panduit software applications, enabling effortless label design and printing.

Overall, the Panduit TDP series printers, including the TDP42H, TDP43H, and TDP46H, are engineered for adaptability, real-time printing efficiency, and high-quality output. Their combination of advanced technologies and robust design makes them essential tools for businesses seeking to enhance their labeling capabilities. Whether it’s for warehouses, data centers, or office environments, these printers offer innovative solutions tailored to the numerous challenges faced in the world of identification and labeling.
Top Page Image Contents