Panduit Catalyst 3550 warranty Running Express Setup

Page 4

3Running Express Setup

When you first set up the switch, you should use Express Setup to enter the initial IP information. This enables the switch to connect to local routers and the Internet. You can then access the switch through the IP address for further configuration.

To run Express Setup:

Step 1 Verify that no devices are connected to the switch, because during Express Setup, the switch acts as a DHCP server. If your PC has a static IP address, before you begin you should change your PC settings to temporarily use DHCP.

Step 2 Connect the AC power cord to the switch and to a grounded AC outlet. The power-on self-test (POST) begins. During POST, the LEDs blink while a series of tests verify that the switch functions properly.

For a DC-powered switch, see the “Connecting to DC Power” section on page 17 for wiring instructions.

Step 3 Wait for the switch to complete POST. It might take several minutes for the switch to complete POST.

Step 4

Verify that POST has completed by confirming that the SYST and STAT LEDs are green.

Step 5

 

 

 

 

 

Press and hold the Mode button for

 

 

 

 

 

3 seconds. When all of the LEDs

 

 

 

 

 

above the Mode button turn green,

 

 

 

 

 

 

 

 

 

 

release the Mode button.

 

 

RPS

 

 

 

 

 

 

 

 

 

SYSTEM

 

 

 

MODE STATUS

 

If the LEDs above the Mode button begin to blink after you press the button, release it. Blinking LEDs mean that the switch has already been configured and cannot go into Express Setup mode. For more information, see the “Resetting the Switch” section on page 21.

UTIL

DUPLX

SPEED

1

2

3

4

5

Mode button

Step 6 Verify that the switch is in Express Setup mode by confirming that all LEDs above the Mode button are green. (The RPS LED remains off on some switch models.)

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Catalyst 3550 Multilayer Switch Getting Started Guide About this Guide Equipment That You Supply to Run Express SetupTaking Out What You Need Shipping Box Contents Running Express Setup DHCP-enabled PC Page Using the Device Manager Managing the SwitchRefreshing the PC IP Address Downloading Cisco Network Assistant Command-Line InterfaceOther Management Options Equipment That You Supply Rack-MountingBefore you Begin Installation Warning Statements Statement Attaching the Brackets Number-8 Phillips flat-head screws Rack-Mount the Switch Connect to the Switch Ports Connect to 10/100 and 10/100/1000 PortsConnect to 100BASE-FX Ports Connecting to DC Power Ground the SwitchWiring the DC Input Power Source Return Troubleshooting Express Setup Case of DifficultyResetting the Switch Accessing Help OnlineFor More Information Obtaining Documentation Cisco.comOrdering Documentation Documentation FeedbackObtaining Technical Assistance Cisco Technical Support WebsiteSubmitting a Service Request Definitions of Service Request SeverityObtaining Additional Publications and Information Cisco Limited Lifetime Hardware Warranty Terms Duration of Hardware Warranty Page Page Page USA

Catalyst 3550 specifications

The Panduit Catalyst 3550 is a cutting-edge switch designed to support modern networking demands with its robust features and advanced technologies. It's an ideal choice for organizations looking to enhance their network infrastructure, whether in data centers, enterprise environments, or large campus networks.

One of the main features of the Catalyst 3550 is its Layer 2 switching capabilities, which allow for efficient data traffic management across the network. It supports a range of Ethernet standards, including Fast Ethernet and Gigabit Ethernet, providing flexibility and scalability. The switch is equipped with multiple Gigabit Ethernet ports, enabling high-speed connectivity for critical applications and devices.

Another significant characteristic of the Catalyst 3550 is its Power over Ethernet (PoE) support. This feature allows the switch to deliver power to connected devices such as IP phones, wireless access points, and security cameras through standard Ethernet cables. This not only simplifies installation but also reduces the need for additional power sources, leading to cost savings and improved efficiency.

The Catalyst 3550 also incorporates advanced security features, providing robust protection against unauthorized access and data breaches. With VLAN support, administrators can segment network traffic, ensuring that sensitive information is isolated. Additionally, the switch features Access Control Lists (ACLs) and 802.1x port-based authentication, enhancing security measures within the network.

To further enhance manageability, the Catalyst 3550 includes support for various network management protocols, such as SNMP and RMON. These protocols allow for real-time monitoring, reporting, and analysis of network performance, enabling IT teams to proactively address potential issues and optimize network operations.

Moreover, the Catalyst 3550 is designed with high reliability and durability in mind. Its rugged construction and high-quality components ensure consistent performance in demanding environments. The switch also features built-in redundancy options, minimizing downtime and ensuring uninterrupted service.

In conclusion, the Panduit Catalyst 3550 stands out as a versatile and powerful networking solution, offering essential features and technologies that meet the evolving needs of modern enterprises. Its combination of high-speed switching, PoE support, robust security, and advanced management capabilities makes it an invaluable asset for any organization looking to build a resilient and efficient network infrastructure.
Top Page Image Contents