Panduit Catalyst 3550 warranty Downloading Cisco Network Assistant, Command-Line Interface

Page 8

Downloading Cisco Network Assistant

Cisco Network Assistant is a free software program that you download from Cisco.com and run on your PC. Network Assistant offers advanced options for configuring and monitoring multiple devices, including switches, switch clusters, switch stacks, routers, and access points.

Follow these steps:

1.From the device manager page, select Network Assistant.

2.Follow the instructions to download the program to your PC.

3.Use the Network Assistant to configure and monitor multiple switches and devices. Refer to the Network Assistant online help and the getting started guide for more information.

Command-Line Interface

You can enter Cisco IOS commands and parameters through the CLI. Access the CLI either by connecting your PC directly to the switch console port or through a Telnet session from a remote PC or workstation.

Follow these steps:

1.Connect the supplied RJ-45-to DB-9 adapter cable to the standard 9-pin serial port on the PC. Connect the other end of the cable to the console port on the switch.

2.Start a terminal-emulation program on the PC.

3.Configure the PC terminal emulation software for 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.

4.Use the CLI to enter commands to configure the switch. Refer to the software configuration guide and the command reference for more information.

Other Management Options

You can use SNMP management applications such as CiscoWorks Small Network Management Solution (SNMS) and HP OpenView to configure and manage the switch. You also can manage it from an SNMP-compatible workstation that is running platforms such as HP OpenView or SunNet Manager.

The Cisco IE2100 Series Configuration Registrar is a network management device that works with embedded CNS agents in the switch software. You can use IE2100 to automate initial configurations and configuration updates on the switch.

See the “Accessing Help Online” section on page 21 for a list of supporting documentation.

8

Image 8
Contents Catalyst 3550 Multilayer Switch Getting Started Guide Taking Out What You Need Equipment That You Supply to Run Express SetupAbout this Guide Shipping Box Contents Running Express Setup DHCP-enabled PC Page Refreshing the PC IP Address Managing the SwitchUsing the Device Manager Other Management Options Command-Line InterfaceDownloading Cisco Network Assistant Before you Begin Rack-MountingEquipment That You Supply Installation Warning Statements Statement Attaching the Brackets Number-8 Phillips flat-head screws Rack-Mount the Switch Connect to the Switch Ports Connect to 10/100 and 10/100/1000 PortsConnect to 100BASE-FX Ports Connecting to DC Power Ground the SwitchWiring the DC Input Power Source Return Troubleshooting Express Setup Case of DifficultyResetting the Switch Accessing Help OnlineFor More Information Obtaining Documentation Cisco.comOrdering Documentation Documentation FeedbackObtaining Technical Assistance Cisco Technical Support WebsiteSubmitting a Service Request Definitions of Service Request SeverityObtaining Additional Publications and Information Cisco Limited Lifetime Hardware Warranty Terms Duration of Hardware Warranty Page Page Page USA

Catalyst 3550 specifications

The Panduit Catalyst 3550 is a cutting-edge switch designed to support modern networking demands with its robust features and advanced technologies. It's an ideal choice for organizations looking to enhance their network infrastructure, whether in data centers, enterprise environments, or large campus networks.

One of the main features of the Catalyst 3550 is its Layer 2 switching capabilities, which allow for efficient data traffic management across the network. It supports a range of Ethernet standards, including Fast Ethernet and Gigabit Ethernet, providing flexibility and scalability. The switch is equipped with multiple Gigabit Ethernet ports, enabling high-speed connectivity for critical applications and devices.

Another significant characteristic of the Catalyst 3550 is its Power over Ethernet (PoE) support. This feature allows the switch to deliver power to connected devices such as IP phones, wireless access points, and security cameras through standard Ethernet cables. This not only simplifies installation but also reduces the need for additional power sources, leading to cost savings and improved efficiency.

The Catalyst 3550 also incorporates advanced security features, providing robust protection against unauthorized access and data breaches. With VLAN support, administrators can segment network traffic, ensuring that sensitive information is isolated. Additionally, the switch features Access Control Lists (ACLs) and 802.1x port-based authentication, enhancing security measures within the network.

To further enhance manageability, the Catalyst 3550 includes support for various network management protocols, such as SNMP and RMON. These protocols allow for real-time monitoring, reporting, and analysis of network performance, enabling IT teams to proactively address potential issues and optimize network operations.

Moreover, the Catalyst 3550 is designed with high reliability and durability in mind. Its rugged construction and high-quality components ensure consistent performance in demanding environments. The switch also features built-in redundancy options, minimizing downtime and ensuring uninterrupted service.

In conclusion, the Panduit Catalyst 3550 stands out as a versatile and powerful networking solution, offering essential features and technologies that meet the evolving needs of modern enterprises. Its combination of high-speed switching, PoE support, robust security, and advanced management capabilities makes it an invaluable asset for any organization looking to build a resilient and efficient network infrastructure.