viii
•Sequential lists (those that describe
•Icons indicate notes, cautions and warnings. Before working on any equipment, be aware of the hazards associated with its installation and use. Also, become familiar with standard practices for preventing accidents.he following icons are used in this document:
Indicates tips, hints and special requirements.
Care is required. Disregarding cautions can cause data loss or equipment damage.
Indicates a potentially dangerous condition or procedure that only Symbol- trained personnel should attempt to correct or perform.
Service Information
If you have a problem with your equipment, contact the Contacting Symbol Support for your region. See Appendix C for additional contact information. Before calling, have the model number, serial number, and several of your bar code symbols at hand.
Call the Support Center from a phone near the scanning equipment so that the service person can try to talk you through your problem. If the equipment is found to be working properly and the problem is symbol readability, the Support Center will request samples of your bar codes for analysis at our plant.
If your problem cannot be solved over the phone, you may need to return your equipment for servicing. If that is necessary, you will be given specific directions.
Symbol Technologies is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty. If the original shipping container was not kept, contact Symbol to have another sent to you.