Symbol Technologies LA-5033, LA-5030 manual Removing the PCI Adapter Driver in Windows

Windows 2000 PCI Adapter Installations 3-13

3.3 Removing the PCI Adapter Driver in Windows 2000

If an existing version of the LA-5033 driver exists in the system, remove it and install the latest version from the Symbol Web site (http://www.symbol.com/services/downloads/wn_abg_drivers.html).

If the LA-5033 PCI Adapter driver and software package was downloaded and launched from the Symbol Web site, the user is required to remove the driver from the system and begin the installation over.

To remove a LA-5033 driver from the system in Windows 2000:

1.Click Start and select Control Panel.

2.Select System and click on the Hardware tab.

3.Click the Device Manager button.

4.Double-clickNetwork Adapters.

A list of the devices currently supported on the system by Windows 2000 displays.

5.Right-click on the Symbol LA-5033 Wireless Networker 802.11 a/g PCI Adapter and select

Uninstall.

A Confirm Device Removal window warns the user the system will uninstall the device.

6.Select OK.

7.Install the driver again, either with the Wireless Networker Configuration Utility or as a standalone driver installation.