Planet Technology ADE-4000 user manual Dynamic IP for WAN

ADE-4000 User Manual

Figure 4-9:Fixed IP set-up screen

Step 2

Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/ Routed Mux, Classical IP over ATM). And Disable “Bridge” function.

Step 3

Click “submit” to commit modifications you’ve done, then click “Save Configura- tion” to store settings. (Modifications will not take effects until next reboot.)

Step 3

Click on “NAT” tab on left panel, and enable the NAPT function in the option menu.

Step 4

Click “Save settings” on left panel to write configuration into machine, and reboot to make settings effective.

Dynamic IP for WAN

If ISP provides a dynamic IP for Internet connection, following steps illustrate how to enable the connection via ADE-4000.

Step 1

Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/ Routed Mux, Classical IP over ATM). And Disable “Bridge” function.

Step2

Check the DHCP option, and fill in the Host Name field (if required.) (This informa- tion should be obtained from ISP. If there is no special demand for this, leave this column blank.)

16