Planet Technology ADE-4000 user manual Connect WAN Cable, Power Up, Check the LEDs

ADE-4000 User Manual

If required, use a standard LAN cable to connect the "Uplink" port to a standard port on another hub.

Step 3

Connect WAN Cable

Connect one end of the RJ-11 phone cord to the LINE port on your ADSL modem. Connect the other end of the RJ-11 phone cord to your wall phone jack.

Step 4

Power Up

Connect the supplied power adapter to ADE-4000 and power up.

Use only the power adapter provided. Using a different one may cause hardware damage

Step 5

Check the LEDs

If there is no cable or wrong cable connected, LAN LED on ADE-4000 should flash in Red, then turn OFF. If it stays Red, there might be a hardware error.

For each LAN (PC) connection, the LAN Link/Act LED should be ON (provided the PC is also ON.)

The ADSL LED should be ON.

6