Settings (Con’t)
Setting the DRC (Dynamic Range Compression)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
ENG
Setting the HDMI Audio
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1 In Stop mode, press the MENU button.
2 Press the Cursor 
button to move to <Audio> and then press the ENTER button. 3 Press the Cursor 
button to move to <DRC> and then press the ENTER button. 4 Press the Cursor 
, 
button to adjust the DRC.
MOVE | ENTER | RETURN EXIT |
When the Cursor 
button is pressed, the effect is greater, and when the Cursor 
button is
pressed, the effect is smaller.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
CHANGE | RETURN EXIT |
Setting the AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match
MOVE ENTER RETURN EXIT
MOVE SELECT RETURN EXIT
1 | In Stop mode, press the MENU button. | |
2 | Press the Cursor | button to move to <Audio> and then press the ENTER button. |
3 | Press the Cursor | button to move to <HDMI AUDIO> and then press |
| the ENTER button. |
|
4 | Press the Cursor | , button to select <ON> or <OFF> and then press |
| the ENTER button. |
|
•ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.
•OFF : Video is transmitted over the HDMI connection cable only, and audio is output through the home theater speakers only.
• The default setting of this product is HDMI AUDIO OFF.
• HDMI AUDIO is automatically
the video.
MOVE ENTER RETURN EXIT
1 | In Stop mode, press the MENU button. | |
2 | Press the Cursor | button to move to <Audio> and then press the ENTER button. |
3 | Press the Cursor | button to move to |
| the ENTER button. |
|
4 | Press the Cursor | , button to select the |
press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
SETUP
MOVE SELECT RETURN EXIT
48 | 49 |