Before Using Your Home Theater
To Operate your Samsung TV and the Home Theater with the
The DVD Home Theater's remote can be used to control Samsung TVs.
1 Plug the main unit's power cord into the AC power supply.
2 Press the TV button to set the remote to TV mode.
3 Press the POWER button to turn on your Samsung TV with this remote.
4 Press the TV/VIDEO button to select VIDEO mode on your TV.
VIDEO
5 Press the DVD RECEIVER button to switch to DVD RECEIVER mode to operate the DVD Home Theater
6 Press the FUNCTION button on the main unit or DVD button on the remote to enable DVD/CD playback.
Disc Playback DVD CD | ENG |
1 Press the OPEN/CLOSE button to open the disc tray.
2 Load a disc.
■Place a disc gently into the tray with the disc’s label facing up.
3 Close the compartment by pressing the OPEN/CLOSE button again.
■ Playback starts automatically.
To stop playback, press the STOP button during playback. | OPERATION |
|
■If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
If the PLAY/PAUSE ( 
) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)
■If pressed twice, <STOP> is displayed, and if the PLAY/PAUSE ( 
) button is pressed, playback starts from the beginning.
To temporarily pause playback, press the PLAY/PAUSE ( 
) button during playback.
■To resume playback, press the PLAY/PAUSE ( 
) button again.
• Avoid getting fingerprints on the writing surface of a disc. It may cause the disc to not read properly.
• Depending on the content of the disc, the initial screen may appear different.
•Any piracy could not be runnable in the player. Otherwise, it violates the CSS (Content Scrambling System : a copy protection system) recommendations.
22 | 23 |