5.1 Decoder Module 3 | Re:source |
Setting the levels on passive speakers
The signal from each individual speaker can be heard for about 3 seconds. During this time, you can set the optimum volume in a range of ± 10 dB, using the rotary volume control or the remote control.
The activated speaker is shown dark.
The goal
The aim of this exercise is that the sound should be experienced at the same intensity from each speaker. This guarantees that effects, dialogue or music reaches the ear in the correct relationship.
This procedure continues until you press the Noise softkey again.
.!. Subwoofer level .!.
The basic subwoofer volume setting is not defined through the Noise menu, as there are very different recording levels, particularly in the case of DVDs, which often require an individual adjustment.
This adjustment can be carried out simply and comfortably in the normal amplifier menu. You can reach this directly through the Amplifier key on the M51 or using the remote control.
Please refer to the Chapter level setting on page 13.
22