Getting Started
Toroidal Ferrite Core
For the Power Cord
POWER
<Main Unit> |
If you attach a Toroidal ferrite core to the power cord, it will help to prevent RF interference from radio signals.
1.Pull the fixing tab of the Toroidal ferrite core to open it.
2.Make two loops in the power cord.
3.Attach the Toroidal ferrite core to the power cord as the figure shows and press it until it clicks.
For the Speaker Cable
FM ANT
OPTICAL
ASC IN
DIGITAL
AUDIO IN
SPEAKERS OUT
CENTER | FRONT L | FRONT TOP L |
SUBWOOFER | FRONT R | FRONT TOP R |
IMPEDANCE : 3
<Main Unit> |
Make 3 loops in each of the speaker cables connected to the REAR L and REAR R terminals of the wireless receiver
Main Unit
1.Open the ferrite core by pulling up the tab.
2.Make two loops in each speaker cable.
3.Attach the ferrite core to the arranged cables and press to close it until you hear a click.
•Attach the ferrite core as close to the main unit as possible.