5.To let the product download update software automatically when available, select Auto Update, and then press the E button. See "Auto Update" on this page for details.
NOTES
The upgrade is complete when the product turns off, and then turns on again by itself.
Samsung Electronics takes no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade.
If you want to cancel the upgrade while the upgrade software is downloading, press the E button. When a system upgrade is in progress, "UPDATE" is displayed on the front panel.
Update now
You can use Update now to update the software through your network connection or by using a USB flash drive. The network instructions are below. The USB flash drive instructions are on this page.
1.Select Update now, and then press the E button. The Update now
2.The product searches on line for the latest software version.
3.If it does not find an update, the "There are no new updates for you at the moment."
4.If it finds a new version, the Update Request pop- up appears.
5.Select OK. The product upgrades the software, turns off, and then turns on automatically.
6.If you do not select OK or Cancel in one minute, the product stores the new upgrade software. You can upgrade the software later using Auto Update.
7.If you select Cancel, the product cancels the upgrade.
NOTES
When the system upgrade is done, check the software details in the Product Information section of the Contact Samsung screen.
Do not turn off the product during the Software Upgrade. It may cause the product to malfunction.
Auto Update
You can set the Auto Update function so that the product downloads new upgrade software when it is in Auto Update mode.
In Auto Update mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it.
1.Press the ▲▼ buttons to select Auto Update Mode, and then press the E button.
2.Select On or Off.
If you select On, the product will automatically download new upgrade software when it is in Auto Update mode with the power off. If it downloads new upgrade software, the product will ask you if you want to install it when you turn the product on.
NOTES
To use the Auto Update function, your product must be connected to the Internet.
Update by USB
1.Visit www.samsung.com.
2.Click SUPPORT on the top right of the page.
3.Enter the product's model number into the search field. As you enter the model number, a drop down will display products that match the model number.
4.Left click your product's model number in the drop down list.
5.On the page that appears, scroll down to and then click Firmware Manuals & Downloads.
6.Click Firmware in the center of the page.
7.Click the ZIP button in the File column on the right side of the page.
8.Click Send in the first
9.Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file.
10.Copy the folder to a USB flash drive.
11.Make sure no disc is inserted in the product, and then insert the USB flash drive into the USB port of the product.
12.In the product’s menu, go to Settings > Support > Software Update.
13.Select Update now.
14.The product searches for the software on the USB drive. When it finds the software, the Update Request
15.Select OK. The product upgrades the software, turns off, and then turns on automatically.
NOTES
There should be no disc in the product when you upgrade the software using the USB jack.
When the system upgrade is done, check the software details in the Product Information section of the Contact Samsung screen.
Do not turn off the product during the software upgrade. It may cause the product to malfunction. Software upgrades using the USB jack must be performed with a USB flash drive only.
04 Settings