Connections
Installing the Speakers on the Tallboy Stand
1.Find the speaker cable that is attached to the Stand. Turn
the Stand and Stand Base | 1 | 2 | Stand Base |
speaker cable, and then draw it through the hole in the |
| ||
Stand Base. |
|
|
|
NOTES |
|
|
|
Handle the Stand carefully. It is heavy. |
| Stand |
|
2. Connect the Stand Base to the bottom of the Stand. |
|
| |
|
|
|
3.Insert three 5x20 screws into the holes in the Stand Base,
and then tighten them with a screwdriver as shown in the | 3 | 4 |
illustration. | ||
4. Connect the speaker to the stand. |
| Speaker |
|
| |
|
| Stand |
5.Insert a 5x15 screw into the screw hole in the rear of the
speaker, and then tighten it with a screwdriver. | 5 | 6 |
|
6.Illustration 6 shows the appearance of the speaker after it
has been assembled. Repeat Steps 1 through 5 with the other speaker, and then go to Step 7.
7.Match the colored plug on the end of the speaker wire connected to each speaker to the colored jacks on the
back of the home theater, and then insert each plug.
Connecting the Other Speakers
1.Match each speaker cable bundle to the correct speaker by matching the color coded
plug on each bundle to the colored sticker on the bottom of each speaker.
2. To attach speaker wire to each speaker:
a.Press down the red tab on the back of the speaker, insert the red wire, and then release the tab.
b. Press down the black tab on the back of the speaker, insert the black wire, and then | Black |
|
|
|
| Red |
|
|
|
| |||
release the tab. |
|
|
|
|
|
|
|
|
|
|
|
| |
3. Connect the speaker wire plugs from each speaker to the back of the product by |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
matching the colors of the speaker plugs to the colors of the speaker jacks. |
|
|
|
|
|
|
4.Connect the left and right surround speakers to the wireless receiver module. Again, match the color of the plugs to the jacks on the wireless receiver module.
5.Plug the power cord of the wireless receiver module into a wall outlet.
6.Turn on the product. The product and wireless receiver module will now communicate with each other and you will hear sound from the Surround speakers.