
2.2 POE-151, the Injector installation
1.Connect a standard network cable from Switch/workstation to “Ethernet” port of
2.Connect the long cable that will be used to connect to the remote device to the port “Ethernet + DC”. The screen in Figure 1 appears.
3.Connect the AC adapter to “DC 48V” of
Figure 1: the Injector installation
2.3
1.Connect a standard network cable from “Ethernet+DC” of
From POE-151 or
IEEE 802.3af Power
Supply equipment
Figure 2: Connection to POE-150S
2.Connect the UTP cable in the package from “Ethernet” of
3.Connect proper DC plug from “DC OUT” of
4.Power on the remote device and the LED indicator on
- 7 -