Planet Technology POE-151 user manual Connect with Ieee 802.3af devices

Page 8

Figure 3: Connection architecture over POE-151/151S

￿Notice:

1.According to IEEE 802.3af standard, the POE-151 will not inject power to the cable if not connecting to IEEE 802.3af devices.

2.Please ensure the output voltage is correct before applying power to remote device.

2.4 Connect with IEEE 802.3af devices

Due to the capability of IEEE 802.3af standard, the POE-151 can directly connect with any IEEE 802.3af end-nodes like wireless access point, VoIP phones and Internet camera where support IEEE 802.3af In-line Power over Ethernet port. The screen in Figure 4 appears.

Figure 4: Connection to IEEE 802.3af device

Once POE-151 detects the existence of an IEEE 802.3af device, the LED indicator will be steady, ON to shows it is- providing power.

￿Notice:

If the connected device is not fully complying with IEEE 802.3af standard or in-line power device, the LED in- dicator of POE-151 will not be steady on.

- 8 -

Image 8
Contents Page Trademarks DisclaimerFCC Warning CE Mark Warning RevisionTable of Contents Checklist About the Power over Ethernet InjectorFeatures IntroductionSpecification Product OutlookHardware Installation Before InstallationPOE-151, the Injector installation From POE-151 or Ieee 802.3af Power Supply equipmentConnect with Ieee 802.3af devices Connection architecture over POE-151/151STroubleshooting Can the POE-151 work with Gigabit Ethernet device?RJ-45 cable pin assignment Switch‘s RJ-45 Pin AssignmentsAppendix a Networking Connection