Quantum Travan 40 GB manual Handling Travan Cartridges, To Load a Cartridge

Operation and Maintenance

Handling Travan Cartridges

Figure 10 To Load a

Cartridge

Drive-activity light /

Eject button

Write-protect switch (red)

To Unload a Cartridge

Wait until the Drive-activity/Ejectbutton light is off. Then push the Eject button. When the cartridge has been ejected by the drive, grasp the exposed sides of the cartridge and pull the cartridge straight out. If the drive-activity light has gone out, but you believe your backup or restore operation did not complete, repeat the backup or restore.

Caution: Do not remove a tape cartridge while the drive-activity light is on.

Handling Travan Cartridges

Although Travan tape cartridges are ruggedly built, they must be handled with care. Observe the following precautions:

•Store cartridges in their protective cases when you are not using them.

•Keep cartridges away from dust, dirt and moisture.

•Keep cartridges away from direct sunlight and heat sources, such as radiators or warm air ducts.

14 Quantum Travan 40 GB Internal Storage System