Quantum Travan 40 GB manual Disc

Page 9

Figure 1 Existing Computer WithTwo IDE Ports (Hard Disc Attached to the Primary IDE Port)

Installing the Drive Installation Procedure

ComputerMotherboard

Primary

IDE port

Secondary

IDE port

Hard

Disc

Attach tape drive and cable here (tape drive must be configured as "Master")

If no devices or cables are attached to the secondary IDE port (see figure 1) you will need to obtain a second IDE cable for your tape drive.

If a CD-ROM or other compatible device is attached to the secondary IDE port (see figure 2) you can install the tape drive on the same cable as the CD-ROM.

Quantum Travan 40 GB Internal Storage System

5

Image 9
Contents 7UDYDQ Copyright Statement Contents Chapter Troubleshooting About This Manual 1Introduction About Your Travan Tape Drive 2Installing the Drive Important PrecautionsWhat You Will Need Installation Procedure Disc ROM Disc Second Atapi Device Configured for Cable Select You may have to remove the mounting brackets ROM Hard Disc Using The Tape Drive Loading and Unloading Cartridges 3Operation and MaintenanceTo Load a Cartridge Handling Travan CartridgesWrite- Protect Feature Setting the Write-Protect SwitchRetensioning Tapes Cleaning the Tape Drive MechanismTape Frame Capacity Length Recommended Tape CartridgesPage Installation troubleshooting 4TroubleshootingTroubleshooting Tape Operations Troubleshooting Tape Operations TroubleshootingADisposal of Electrical and Electronic Equipment Quantum Travan 40 GB Internal Storage System