PowerDsine PD-3012, PD-3006 manual Technical Specifications

Page 15

 

 

 

 

 

 

PD-3006/12

 

 

 

 

 

Table 3-1: Troubleshooting Steps

 

 

 

 

 

 

 

 

 

 

Symptom

 

 

Corrective Steps

 

 

 

 

 

 

 

 

 

 

 

The end device

 

 

1. Verify that the port indicator on the front panel is

 

 

 

operates, but

 

 

continuously lit.

 

 

 

there is no data

 

 

2. If an external power splitter is in use, replace it with a

 

 

 

link.

 

 

known-good splitter.

 

 

 

 

 

 

3. Verify that for this link, you are using standard

 

 

 

 

 

 

UTP/FTP Category 5 straight (non-crossover)

 

 

 

 

 

 

cabling, with all four pairs. Check that the link is 100

 

 

 

 

 

 

m or less.

 

 

 

 

 

 

4. Try to re-connect the same end device into a different

 

 

 

 

 

 

port on the same unit or into different unit – if it works,

 

 

 

 

 

 

there is probably a faulty port or RJ-45 connection.

 

 

 

 

 

 

 

 

 

 

 

Is it safe to keep

 

 

This is a safe condition. The orange indication is due to:

 

 

 

the Midspan

 

 

1. A device, not compliant to IEEE 802.3af, was detected.

 

 

 

running while a

 

 

2. Terminals 4/5 and 7/8 are shorted together.

 

 

 

port indicator is

 

 

 

 

 

 

 

3. Forced external power fed into the port.

 

 

 

orange?

 

 

 

 

 

 

 

During these conditions, port power is disconnected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Technical Specifications

Physical Specifications

Dimensions

44 x 281 x 248 mm

(h x w x l)

(1.73 x 11.06 x 9.76 inch)

Weight

1.2 kg (3.2 lb)

Environmental Specifications

Temperature

- Operating

0 to 40 °C (32 to 104 °F)

- Storage

-20 to 70 °C (-4 to 158 °F)

Humidity

10 to 90% (non-condensing)

Electrical Specifications

Input Voltage

90 to 264 VAC at 47-63 Hz

 

 

Input Current

1.5 A max. at 115 Vac

 

 

Total Output Power

92 W max.

 

 

Output Power, per Port

15.4 W (not to exceed 92 W total for all ports)

Nominal Output Voltage

44 to 57 VDC

 

 

 

 

 

 

Power over LAN Solutions

15

Cat. No.: 06-6831-056

Page 14 Page 16
Image 15
Page 14 Page 16
Contents User Guide Ieee 802.3af-compliantAcknowledgements DisclaimerContents PD-3006/12 General Guidelines Safety InformationPower Cord Power Management PD-3012 only About the Power over LAN Midspan10/100BASE-TX Ports Definition IndicatorsPort Indications PD-3006/12 Background Information Connecting CablesRack-Mounting Bracketsoptional only Powering upInstalling Brackets on Midspan Preliminary Steps TroubleshootingTechnical Specifications Cat. No Release

PD-3006, PD-3012 specifications

PowerDsine, a leading provider of Power over Ethernet (PoE) solutions, offers a range of innovative products designed to deliver reliable power and data connectivity over existing Ethernet infrastructure. Among its notable offerings are the PowerDsine PD-3012 and PD-3006 series, which are known for their advanced features, robust performance, and versatile applications.

The PowerDsine PD-3012 is a midspan PoE injector that supports IEEE 802.3af and IEEE 802.3at standards, allowing it to deliver up to 12 watts of power per port. This makes it ideal for powering mid-range devices such as IP cameras, VoIP phones, and Wi-Fi access points. It features eight output ports, enabling users to connect multiple devices simultaneously, which helps streamline installation and reduce cable clutter.

One of the main characteristics of the PD-3012 is its intelligent power management feature. This technology monitors the power consumption of connected devices, ensuring optimal power distribution and preventing overloading. Additionally, it employs short-circuit and over-temperature protection mechanisms, promoting safety and reliability in PoE applications.

On the other hand, the PowerDsine PD-3006 is tailored for smaller deployments, providing six ports with a power output of up to 15.4 watts per port. Like the PD-3012, it adheres to the IEEE 802.3af standard, making it suitable for a range of low-power devices, including networked security cameras, wireless access points, and other PoE-enabled peripherals. Its compact design allows for easy installation in tight spaces, making it a practical choice for both enterprise and home office use.

Both the PD-3012 and PD-3006 incorporate advanced technologies such as surge protection and automatic detection of PoE-enabled devices. This ensures that the midspans provide power only where it is needed, reducing potential damage to non-PoE equipment while maximizing efficiency.

In conclusion, PowerDsine's PD-3012 and PD-3006 series are exemplary solutions for organizations looking to harness the capabilities of Power over Ethernet technology. With their robust features, intelligent power management, and compliance with industry standards, these PoE injectors offer a reliable and effective means of powering modern network devices. Their versatility makes them suitable for a wide range of applications, from small businesses to large enterprises, ensuring seamless connectivity and efficiency in network operations.
Top Page Image Contents