PowerDsine PD-3006, PD-3012 manual Power Cord

Page 6

PD-3006/12

1.2Power Cord

In the event that the power cord is replaced, the replacement must meet local requirements.

U.S.A. and Canada

*The cord must be UL-approved or CSA certified.

*The minimum specification for the flexible cord is:

-No. 18 AWG

-Type SV or SJ

-Three-conductor.

*The cord set must have a rated current capacity of at least 10 A.

*The attachment plug must be an earth-grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.

Denmark

* The supply plug must comply with section 107-2-D1,

 

standard DK2-1a or DK2-5a.

Switzerland

* The supply plug must comply with SEV/ASE 1011.

*The appliance coupler (connecting to the Midspan and not to the wall plug) must have a configuration for mating with an EN60320/IEC320 appliance inlet.

*The power socket outlet must be near the Midspan and be easily accessible. You can only remove power from the unit by disconnecting the power cord from the outlet.

*This unit operates under SELV (Safety Extra Low Voltage) conditions according to EN60950/IEC 950. The conditions are only maintained if the equipment to which it is connected also operates under SELV conditions.

*France and Peru only: This unit cannot be powered from IT supplies. If your supplies are of IT type, this unit must be powered by 230 V (2P+T), via an isolation transformer with a ratio of 1:1 and with the secondary connection point labeled Neutral, connected directly to ground.

*U.K. only: The Power over LAN Midspan is covered by General Approval, NS/G/12345/J/100003, for indirect connection to a public telecommunications system.

Power over LAN Solutions

6

Cat. No.: 06-6831-056

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Ieee 802.3af-compliant User GuideDisclaimer AcknowledgementsContents PD-3006/12 Safety Information General GuidelinesPower Cord About the Power over LAN Midspan Power Management PD-3012 onlyIndicators 10/100BASE-TX Ports DefinitionPort Indications PD-3006/12 Connecting Cables Background InformationPowering up Rack-Mounting Bracketsoptional onlyInstalling Brackets on Midspan Troubleshooting Preliminary StepsTechnical Specifications Cat. No Release

PD-3006, PD-3012 specifications

PowerDsine, a leading provider of Power over Ethernet (PoE) solutions, offers a range of innovative products designed to deliver reliable power and data connectivity over existing Ethernet infrastructure. Among its notable offerings are the PowerDsine PD-3012 and PD-3006 series, which are known for their advanced features, robust performance, and versatile applications.

The PowerDsine PD-3012 is a midspan PoE injector that supports IEEE 802.3af and IEEE 802.3at standards, allowing it to deliver up to 12 watts of power per port. This makes it ideal for powering mid-range devices such as IP cameras, VoIP phones, and Wi-Fi access points. It features eight output ports, enabling users to connect multiple devices simultaneously, which helps streamline installation and reduce cable clutter.

One of the main characteristics of the PD-3012 is its intelligent power management feature. This technology monitors the power consumption of connected devices, ensuring optimal power distribution and preventing overloading. Additionally, it employs short-circuit and over-temperature protection mechanisms, promoting safety and reliability in PoE applications.

On the other hand, the PowerDsine PD-3006 is tailored for smaller deployments, providing six ports with a power output of up to 15.4 watts per port. Like the PD-3012, it adheres to the IEEE 802.3af standard, making it suitable for a range of low-power devices, including networked security cameras, wireless access points, and other PoE-enabled peripherals. Its compact design allows for easy installation in tight spaces, making it a practical choice for both enterprise and home office use.

Both the PD-3012 and PD-3006 incorporate advanced technologies such as surge protection and automatic detection of PoE-enabled devices. This ensures that the midspans provide power only where it is needed, reducing potential damage to non-PoE equipment while maximizing efficiency.

In conclusion, PowerDsine's PD-3012 and PD-3006 series are exemplary solutions for organizations looking to harness the capabilities of Power over Ethernet technology. With their robust features, intelligent power management, and compliance with industry standards, these PoE injectors offer a reliable and effective means of powering modern network devices. Their versatility makes them suitable for a wide range of applications, from small businesses to large enterprises, ensuring seamless connectivity and efficiency in network operations.
Top Page Image Contents