Symantec HP-UX manual Remove VRTSweb, Run the following command on all the nodes to start VCS

44

Upgrading the product

Upgrading from 3.5 to 5.0

13Change the configuration files by running the following commands from one of the nodes.

#/opt/VRTS/bin/hastart

#/opt/VRTS/bin/haconf -makerw

#/opt/VRTS/bin/hatype -add CVMVxconfigd

#/opt/VRTS/bin/hares -add cvm_vxconfigd CVMVxconfigd cvm

#/opt/VRTS/bin/hares -modify cvm_vxconfigd Enabled 1

#/opt/VRTS/bin/hares -delete qlogckd

#/opt/VRTS/bin/haconf -dump -makero

#/opt/VRTS/bin/hastop -all -force

If you have configured the VCS Cluster Manager (Web Console), complete step a through step d to modify the

/etc/VRTSvcs/conf/config/main.cf file.

aRemove VRTSweb:

Process VRTSweb (

PathName = "/opt/VRTSvcs/bin/haweb"

Arguments = "10.129.96.64 8181"

)

bReplace it with:

VRTSWebApp VCSweb (

Critical =0

AppName = vcs

InstallDir = "/opt/VRTSweb/VERITAS"

TimeForOnline = 5

)

cAdd the NIC resource in the ClusterService group. For example, where the name of the NIC resource is named csgnic and the public NIC device is hme0, add:

NIC csgnic (

Device = hme0

dAdd new dependencies for the new resources in the ClusterService group. For example, using the names of the VRTSWebApp, NotifierMngr, IP, and NIC resources, enter lines that resemble:

VCSweb requires webip

ntfr requires csgnic

webip requires csgnic

14Verify the syntax of the /etc/VRTSvcs/conf/config/main.cf file by running the following command on system01:

#cd /etc/VRTSvcs/conf/config

#/opt/VRTS/bin/hacf -verify .

15Run the following command on all the nodes to start VCS.

#/opt/VRTS/bin/hastart