About this Manual, Preface | SUPER MICRO Computer X8DT6, X8DTE

Preface

About this Manual

This manual is written for system integrators, PC technicians and knowledgeable

PC users. It provides information for the installation and use of the X8DT6/ X8DT6-F/X8DTE/X8DTE-F motherboard.

About this Motherboard

The X8DT6/X8DT6-F/X8DTE/X8DTE-F supports the Intel® 5500/5600 Series Processor platform, the ﬁrst dual-processing platform that supports the Intel QuickPath Interconnect (QPI) Technology, providing the next generation point-to- point system interface to replace the current Front Side Bus. With the 5500/5600 Series Processor platform built in, the X8DT6/X8DT6-F/X8DTE/X8DTE-F offers substantial enhancement in system performance with increased bandwidth and unprecedented scalability optimized for high-end servers, High Performance Com- puting (HPC) systems and intensive applications. Please refer to our web site (http:// www.supermicro.com/products/) for updates on supported processors. This product is intended to be installed and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, speciﬁcations and performance of the mother- board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in- stalling the processor, memory modules and other hardware components into the system. If you encounter any problems, see Chapter 3, which describes trouble- shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS and provides detailed information on running the CMOS Setup utility.

Appendix A lists BIOS POST Error Codes. Appendix B provides Software Instal- lation Instructions.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic system failure or to avoid bodily injury.

iii

X8DTE-F, X8DT6-F, X8DT6, X8DTE specifications

Super Micro Computer offers a robust line of server motherboards designed for high performance, reliability, and scalability. Among these are the X8DTE, X8DT6, X8DT6-F, and X8DTE-F models, which cater to diverse computing needs in enterprise environments.

The X8DTE motherboard is equipped with an Intel 5500 chipset and supports dual-socket configurations, allowing for the installation of powerful Intel Xeon 5500 and 5600 series processors. With support for up to 192GB of DDR3 ECC memory, the X8DTE ensures data integrity and error correction, making it an ideal choice for mission-critical applications. It also features six SATA 3.0 Gb/s interfaces for storage solutions, ensuring high data transfer rates and ample storage capability.

The X8DT6 motherboard shines with its flexible architecture and support for dual CPUs, also accommodating the Intel Xeon 5500 and 5600 series processors. This model offers expansive memory potential, supporting up to 192GB of DDR3 ECC memory, which is crucial for applications demanding high memory bandwidth. Additionally, the X8DT6 provides optimized power management features, enhancing energy efficiency and reducing operational costs.

For those seeking advanced storage capabilities, the X8DT6-F and X8DTE-F variants come with integrated SAS support, offering enhanced performance for critical database applications. These models are designed to support Supermicro’s innovative SuperStorage systems, which can handle extensive data workloads efficiently. The X8DTE-F motherboard offers a total of eight 3.5-inch hot-swap drive bays, providing flexibility in storage management.

All four motherboard models feature Supermicro's robust security features, including chassis intrusion detection and a dedicated management controller for remote server management. Their compatibility with a wide range of operating systems and virtualization software, such as VMware and Microsoft Hyper-V, ensures that users can optimize their server environments tailored to specific workloads.

In conclusion, the Super Micro X8DTE, X8DT6, X8DT6-F, and X8DTE-F motherboards excel in delivering exceptional performance and reliability for demanding server applications. With their advanced technologies, extensive memory support, and versatile storage options, these motherboards represent an excellent choice for businesses seeking to enhance their computing infrastructure.