Chapter 4: AMI BIOS
Remote Access Configuration
Remote Access
This feature allows the user to enable Remote Access support. The options are Disabled and Enabled. If Remote Access is set to Enabled, the following items will display:
Serial Port Number
This feature allows the user to decide which serial Redirection. The options are COM 1, COM2, and abled when the BMC is detected at system boot.)
port to be used for Console COM3*. (*COM3 will be en-
Base Address, IRQ
This item displays the base address and IRQ of the serial port used for Console Redirection.
Serial Port Mode
This feature allows the user to set the serial port mode for Console Redirection. The options are 115200 8, n 1; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and 9600 8, n, 1.
Flow Control
This feature allows the user to set the flow control for Console Redirection. The options are None, Hardware, and Software.
Redirection After BIOS POST
Select Disabled to turn off Console Redirection after
Terminal Type
This feature allows the user to select the target the terminal type for Console Redirection. The options are ANSI, VT100, and
VT-UTF8 Combo Key Support
A terminal keyboard definition that provides a way to send commands from a remote console. Available options are Enabled and Disabled.