Philips FW-C50, FW-C70 manual Selecting a desired track, Programming Tracks, Reviewing the program

Page 15

15

CD

•If you wish to change the inner disc during playback, press DISC CHANGE again.

ª“DISC CHANGE" will be displayed.

ªThe CD will stop playing.

ªThe CD carousel tray will close to

retrieve the inner CD and then open again with the inner CD accessible.

3Press OPEN•CLOSE to close the CD carousel tray.

Selecting a desired track

Selecting a desired track when playback is stopped

1Press ’ or ‘ until the desired track appears on the display.

2Pressƒ to start playback.

ªThe selected track number and elapsed playing time appear on the display.

Selecting a desired track during playback

•Press ’ or ‘ until the desired track appears on the display.

ªThe selected track number and elapsed playing time appear on the display.

•If you press ’ once it will skip to the beginning of the current track and play the track again.

Note:

–Pressing’ during shuffling can only skip to the beginning of the current track.

Searching for a particular passage during playback

•Press and hold ˆ or ‡ until the desired passage is located.

ª The volume will be reduced.

•Play returns to normal when ˆ or

‡ is released.

Programming Tracks

Programming tracks of a loaded CD is possible when playback is stopped.The display will indicate the total tracks stored in the program. Up to 40 tracks can be stored in the memory in any order.When 40 tracks are stored and you attempt to store another track, the display will show “FULL”.

1Load the desired discs in the disc trays.

2Press PROG to start programming.

ªThe PROGRAM starts flashing.

ªIt will cancel any previously selected repeat mode.

3Press the CD (CD 1•2•3) or DISC 1/2/3 button to select the disc.

4Press ’ or ‘ to select the desired track.

5Press PROG to store the track.

•Repeat steps 3 to 5 to store other discs and tracks.

6Press ‚ once to end programming.

ªThe total number of tracks programmed and total playing time appear on the display.

Notes:

–If the total playing time is more than “99:59“ or if one of the programmed tracks has a number greater than 30, then “--:--” appears on the display instead of the total playing time.

–If the system is reading the disc, programming is not possible, “READING” will be displayed and followed by "DISC X" "X" is the current read disc number.

–During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically.

Reviewing the program

Reviewing of the program is possible only when playback is stopped.

•Press ’ or ‘ repeatedly to review the programmed tracks.

•Press ‚ once to exit review mode.

Playing the program

1Press ƒ to start program playback.

ª“PLAY PROGRAM” will be displayed.

ªThe track number and elapsed playing time of the current track will appear on the display.

•If you press REPEAT during program playback, the current track or all programmed tracks will be played repeatedly.

ª“TRACK” or "PROGRAM" will be displayed.

ªThe REPEAT and PROGRAM appear

on the display.

2Press ‚ to stop program playback.

Notes:

–If you press any of the CD DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAM display also will disappear temporarily from the display. It will reappear when playback of the selected disc ends.

–REPEAT DISC mode will be cancelled when program playback begins.

Erasing the program (when

playback is stopped)

•Press ‚.

ª“PROGRAM CLEARED” will be displayed.

Note:

–The program will be erased when the system is disconnected from the power supply or when the CD carousel tray is opened.

pg 01-28/C50-C70/37-Eng

15

18/11/1999, 2:39 PM

3139 116 19441 (ENG)

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Mini Hi-Fi System Warranty Verification Dear Philips product owner Congratulations on your purchase, and welcome to the familySet complies with the FCC-Rules, Part 15 and with 21 CFR EL 4562-E004 99/3WHO is COVERED? Audio SystemFW-C70 FW-C50 General Information General Information Safety InformationAccessories Supplied Safety InformationRear Connections PreparationInserting batteries into the Remote Control FM Wire Antenna ConnectionConnecting other equipment to your System AC Power Supply3CD ControlsControls on the system and remote control Operating the System Sound Control To switch off DBBSelecting the Source Selecting the Equalizer DisplayPlaying a CD Discs for playbackCD Direct Play Loading the CD ChangerPlaying the program Selecting a desired trackProgramming Tracks Reviewing the programTuner Tuning to radio stationsManual programming Storing Preset StationsTuning to Preset Radio Stations Automatic programmingLoading a tape Rewind/Fast Forward TapeSelecting External Equipment Tape AUXRecording CD Synchro Start RecordingOne Touch Recording Clock Clock SettingPress CLOCK/TIMER to select clock mode 21RECORDINGTo start the Timer again for Timer Sleep TimerTimer Setting To switch off the TimerSpecifications SpecificationsRadio Reception Maintenance TroubleshootingMaintenance CD Player OperationGeneral Tape Deck OperationTable of Contents Guide FW-C70 FW-C50

FW-C50, FW-C70 specifications

The Philips FW-C50 and FW-C70 are compact audio systems well-regarded for their vibrant sound quality and innovative features. Designed to cater to music enthusiasts who appreciate both audio fidelity and user-friendly functionality, these systems have become a popular choice for homes and small gatherings.

One of the standout features of the FW-C50 and FW-C70 is their powerful audio output. With multiple speakers, these systems are engineered to deliver rich bass and clear treble, creating an immersive listening experience. The integration of Dynamic Bass Boost technology enhances low-frequency sounds, allowing users to enjoy deep, resonant audio during playback of various music genres.

Another significant characteristic of both models is their versatility in connectivity. They support multiple input options, including CD, USB, and FM radio. This flexibility allows users to play their favorite music from various sources, including digital files stored on USB devices or traditional CDs. Additionally, the systems can easily connect to other devices, enabling streaming from smartphones and tablets through Bluetooth technology. This feature is particularly appealing for modern users who prefer to listen to music on the go.

Both systems have user-friendly interfaces, making them accessible to individuals of all ages. The clear LED display provides essential information, such as track names and radio frequencies, while the intuitive control buttons enable easy navigation through different functions. The remote control option further enhances convenience, allowing users to control playback from a distance.

In terms of design, the FW-C50 and FW-C70 exhibit a sleek and contemporary appearance, easily blending into various interior decors. Their compact size makes them suitable for limited spaces, whether in a living room, bedroom, or even a kitchen.

Additionally, these audio systems are equipped with features like programmable memory for radio stations and a sleep timer, creating a customized listening experience tailored to the user’s preferences.

Overall, the Philips FW-C50 and FW-C70 systems perfectly combine quality sound, versatile connectivity, and modern design, making them an excellent choice for anyone looking to enhance their audio experience at home or during social gatherings. With their advanced technology and user-friendly features, these compact audio systems stand out as reliable companions for music lovers.
Top Page Image Contents