Samsung HT-DS400 instruction manual Dolby Pro Logic II Effect, Press PL II Mode, Then press Cursor

41P~74P(DS400)-SECA GB 11/10/04 9:16 AM Page 61

Dolby Pro Logic II Effect

This function works only in Dolby Pro Logic MUSIC mode.

1	Press PL II MODE
	button to select ‘MUSIC’

mode.

	LINEAR PCM DSP TITLE PBC CHAP PRGM RDS RT		TA ST TUNED
L C	R
SW		CMX	kHz
LS	RS MPEG-2 AAC MPEG		MHz

2	Press	PL II EFFECT button
	and then press Cursor ,
	buttons to select the mode.

•You can select either 0 or 1.

	LINEAR PCM DSP TITLE PBC CHAP PRGM RDS RT		TA ST TUNED
L C	R
SW		CMX	kHz
LS	RS MPEG-2 AAC MPEG		MHz

3	Press	PL II EFFECT button
	and then press Cursor ,

buttons to select the mode.

•You can select between 0 and 7.

	LINEAR PCM DSP TITLE PBC CHAP PRGM RDS RT		TA ST TUNED
L C	R
SW		CMX	kHz
LS	RS MPEG-2 AAC MPEG		MHz

4 Press PL II EFFECT button and then press Cursor , buttons to select the mode.

•You can select between 0 and 6.

	LINEAR PCM DSP TITLE PBC CHAP PRGM RDS RT		TA ST TUNED
L C	R
SW		CMX	kHz
LS	RS MPEG-2 AAC MPEG		MHz

SETUP

Note	• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
	selected automatically and	(Dolby Pro Logic II) button does not work.

•PANORAMA: This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.

•CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers produce phantom sound.

•DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.

62