Password for rating, Level has been forgotten

41P~74P(DS400)-SECA GB 11/10/04 9:16 AM Page 69

Symptom	Check/Remedy

• Disc is rotating but no	• Is the TV power on?
picture is produced.	•	Are the video cables connected properly?
picture is produced.	•
• Picture quality is poor and	• Is the disc dirty or damaged?
• Picture quality is poor and	• A poorly manufactured disc may not be playable.
picture is shaking.	• A poorly manufactured disc may not be playable.
picture is shaking.

The remote control does not	•	Is the remote control being operated within its operation range of
The remote control does not	•	angle and distance?
work.	•	Are the batteries exhausted?
work.	•
	• Have you selected the mode(TV/DVD) functions of the remote
		control (TV or DVD) correctly?

Audio language and	• Audio language and subtitles will not work for DVDs not containing
subtitles do not work.
subtitles do not work.		them. And depending on the disc, they may work differently.

Menu screen does not appear even	• Are you using a disc that does not contain menus?
when the menu function is selected.	• Are you using a disc that does not contain menus?
when the menu function is selected.

Aspect ratio cannot be	•	You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Aspect ratio cannot be	•	mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
changed.		mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
changed.		ratio only. Refer to the DVD disc jacket and then select the
		appropriate function.

Can't receive radio	•	Is the antenna connected properly?
Can't receive radio	•
broadcast.	• If the antenna's input signal is weak, install an external FM
broadcast.		antenna in an area with good reception.

• The main unit is not working.

	• Turn off the power and hold the		button on the main unit for
(Example: The power goes out or	• Turn off the power and hold the		button on the main unit for
(Example: The power goes out or		longer than 5 seconds.
strange noise is heard.)		longer than 5 seconds.
strange noise is heard.)
• The DVD player is not	Using the RESET function will erase all stored settings.
working normally.	Do not use this unless necessary.
working normally.

•While “NO DISC” message appears on the display of main unit, hold

The password for rating	the main unit's	button for longer than 5 seconds. “INTIAL” appears
level has been forgotten.	on the display and all settings will return to the default values.
	• Press the POWER button.
	Using the RESET function will erase all stored settings.
	Do not use this unless necessary.

MISCELLANEOUS

picture is produced.

picture is shaking.

work.

subtitles do not work.

Aspect ratio cannot be

broadcast.

• The main unit is not working.

working normally.

The password for rating

level has been forgotten.