SUPER MICRO Computer X6DHi-G2, X6DH3-G2 user manual Combined Mode, Enhanced Mode

Page 92

X6DH3-G2/X6DHi-G2 User's Manual

The Combined Mode:

In this mode, system BIOS assigns the traditional IRQ 14 and IRQ 15 for the use of HDD. Up to 4 ATA devices are supported by this mode.

Within the Combined Mode, the following three modes are supported:

*Non-Combined Mode: Parallel ATA only :with the maximum of 4 devices sup- ported;

*Non-Combined Mode: Serial ATA only: with the maximum of 2 devices sup- ported;

Primary Master(=PM)

Yes

Yes

No

No

No

 

No

Primary Slave(=PS)

Yes

No

Yes

No

No

 

No

Secondary Master(=SM)

Yes

No

No

Yes

No

 

No

Secondary Slave(=SS)

Yes

No

No

No

Yes

 

No

SATA Port0

No

SM

SM

PM

PM

 

PM

SATA Port1

No

SS

SS

PS

PS

 

PS

*Note: (No=Not Present,

Yes=Present) Also, if Logical Primary

is

selected, the IDE channels are no longer available.

 

 

 

The Enhanced Mode:

In this mode, system BIOS will automatically search for all available IRQs for the use of HDD. For newer Operating Systems that support the Enhanced Mode, such as Windows XP, Windows 2000, and Windows 2003, you can set SATA and PATA to the Enhanced Mode. (*The newer Operating Systems can accommodate both Enhanced Mode and Combined Mode and support up to 6 ATA devices.)

(*Please refer to the "Advanced Chipset Control" under the "Advanced" Setup in the BIOS for the selection of Combined Mode or Enhanced Mode,).

C-2

Page 91 Page 93
Image 92
Page 91 Page 93
Contents Super Reproductive harm About This Manual Manual Organization Conventions Used in the ManualTable of Contents Troubleshooting SMBBios AppendicesChecklist OverviewContacting Super Micro HeadquartersEurope Asia-PacificX6DH3-G2/X6DHi-G2 Image Super Quick Reference X6DH3-G2/X6DHi-G2 Jumper Description Default SettingConnector Description Motherboard Features Acpi Features DimensionsOnboard I/O OtherBlock Diagram of the E7520 Chipset Chipset Overview 6300ESB System Features6300ESB ICH System Features Special Features PC Health MonitoringAcpi Features Slow Blinking LED for Suspend-State IndicatorMain Switch Override Mechanism CPU Overheat LED and Fan Fail ControlPower Supply Super I/OExternal Modem Ring-On Wake-On-LAN WOLIntroduction Page Unpacking PrecautionsStatic-Sensitive Devices Xeon Processor and Heatsink Installation CPU InstallationCEK Heatsink Installation To Un-install the Heatsink PGA604 Socket Empty and with Processor Installed Mounting the Motherboard in the ChassisMemory Support Installing DIMMsDimm Installation See -2 on I/OPorts/Control Panel Connectors Release TabJF1 Header Pins Front Control PanelConnecting Cables ATX Power ConnectorPin and 8-pin Power Connectors Pin12V CPU PWR Pin ATX PWR Pin 12V PWRPower LED Power LED Pin Definitions JF1NMI Button NMI Button Pin Definitions JF1NIC1/NIC2 LED Indicators HDD LEDPower Fail LED Overheat/FanFail LEDReset Button Power ButtonReset Button Pin Definitions JF1 Power Button Pin Definitions JF1Chassis Intrusion Serial PortsChassis Intrusion Pin Definitions JL1 Serial Port Pin DefinitionsUniversal Serial Bus USB Universal Serial Bus Pin DefinitionsUSB 0/1 FP USB 2/3Glan Giga-bit Ethernet Ports ATX PS/2 Keyboard PS/2 Mouse PortsKB/Mouse PS/2 Keyboard Mouse Port Pin DefinitionsPower LED/Speaker Fan HeadersWake-On-Ring Wake-On-LANWake-On-Ring Pin Definitions Wake-On-LAN Pin DefinitionsPower SMB I2 C Connector SMB Header Pin DefinitionsSAS SMB PWR Pin Definitions Adaptec SAS SMB Power I2C Connector *For the X6DH3-G2 onlySASACTOutput Pin Definitions PWR Supply Fail LED Pin Definitions Power Supply Failure LEDOverheat LED JOH Jumper Settings Glan Enable/DisableGlan Enable Jumper Settings Glan 1 Enable Glan 2 EnableWatch Dog Enable Watch Dog Jumper Settings JWDCmos Clear Watch Dog Clear CmosVGA Enable/Disable Alarm Reset JAR3rd PWR Supply PWR Fault Detect J3P SAS Controller Enable *For the X6DH3-G2 onlyPWR Force-On Power Force On Enable DisablePower Force On Enable/Disable Jumper Settings Onboard Indicators Glan LEDsAdaptec SAS Activity LED Indicators For the X6DH3 SAS ActLEDParallel Port ConnectorParallel Printer Port Floppy Connector FloppyIDE Connectors BalePage Troubleshooting Procedures Before Power OnNo Power No VideoLosing the System’s Setup Configuration Technical Support ProceduresMemory Errors Frequently Asked Questions Question How do I update my BIOS?Returning Merchandise for Service Question Whats on the CD that came with my motherboard?System Bios How To Change the Configuration DataStarting the Setup Utility IntroductionPress the Delete key to enter Setup Running SetupMain Bios Setupʳ Main Bios Setup Menu Main Setup FeaturesSerial ATA Serial ATA RAID EnableNative Mode Operation LBA Mode Control TypeMulti-Sector Transfer Bit I/OAdvanced Setup Transfer ModeUltra DMA Mode System MemoryBoot Features Quick Boot ModeQuiet Boot Acpi ModeMemory Cache Cache System Bios Area Cache Video Bios AreaCache Base 0-512K Cache Base 512K-640KDefault Primary Video Adapter PCI Parity Error ForwardingDiscrete Mtrr Allocation PCI ConfigurationReset Configuration Data Enable MasterLatency Timer ROM Scan OrderingLarge Disk Access Mode Force Compliance ModeClock Spectrum Feature Delayed Transaction DiscardSerr Signal Condition Enabling Multi-Media TimerUSB Function Legacy USB SupportCPU and the OS Processor Power ManagementThermal Management 2 *Available when supported by the CPU Device Configuration KBC Clock InputOnboard COM Base I/O AddressDMA Channel Floppy Disk ControllerDMI Event Logging Event Log ValidityConsole Redirection COM Port AddressBaud Rate Console TypeHardware Monitor Logic CPU Temperature Threshold Vcore A/Vcore B P3V3N12V P12V P5VsbSupervisor Password Is User Password IsSet Supervisor Password SecurityPassword on Boot Set User PasswordFixed Disk Boot Sector Boot +Removable DevicesCdrom Drive +Hard DriveExit Page Keyboard error Keyboard locked Unlock key switchMonitor type does not match Cmos Run Setup System battery is dead Replace and run SetupSystem Cmos checksum bad Default configuration used System timer errorReal time clock error Check date and time settingsSystem cache error Cache disabled Fail-Safe Timer NMI FailedAllocation Error for device Entering SetupPS/2 Mouse Boot Summary Screen Invalid System Configuration DataDevice IRQ conflict Nnnn kB Extended RAM PassedPress F1 to resume, F2 to Setup, F3 for previous Press F2 to enter SetupSystem Bios shadowed Video Bios shadowedPage Post Code Description Recoverable Post ErrorsTerminal Post Errors Post Code Description Post Code Description Post Code Description Post Code Description Page ATA Operate Mode Introduction to the Intel 6300ESB I/O Controller HubCombined Mode Enhanced ModeAppendix C Software Installation Adaptec Embedded Serial ATA with HostRAID Controller Driver Using the Adaptec RAID Configuration Utility ARCUsing the Array Configuration Utility ACU Managing Arrays Viewing Array Properties Deleting ArraysCreating Arrays To create an arrayAssigning Array Properties To assign properties to the new arrayRaid Level Create Via When Appropriate Page Adding a Bootable Array Deleting a Bootable ArrayInitializing Disk Drives To initialize drivesPage Page Rebuilding Arrays To Rebuild an arrayUsing the Adaptec RAID Configuration Utility ARC Using the Array Configuration Utility ACUManaging Arrays Viewing Array PropertiesDeleting Arrays Assigning Array Properties Adding a Bootable Array To initialize drives To Rebuild an arrayTo access the SAS utilities To Set Controller Configuration To Set Physical Configuration Using the Disk Utilities To Exit Adaptec RAID Configuration Utility SAS is for the X6DH3-G2 only Installing Other Software Programs and Drivers Supero Doctor Supero Doctor III Interface Display Screen-II Remote Control

X6DH3-G2, X6DHi-G2 specifications

Super Micro Computer is renowned for its innovation in the server and workstation market, and the X6DH3-G2 and X6DHi-G2 motherboards are prime examples of their commitment to performance, reliability, and advanced technology. These motherboards are designed to cater to the demands of enterprise-level applications, offering robust support for a variety of workloads.

The X6DH3-G2 and X6DHi-G2 motherboards are based on the Intel E7501 chipset, supporting the Intel Xeon processor family. This allows for significant computing power, making them ideal choices for data-centric applications in various fields, from scientific research to database management. One of the standout features of these motherboards is their dual-processor capability, enabling users to harness the power of two Xeon CPUs simultaneously for enhanced multitasking and performance.

In addition to dual-processor support, both motherboards offer up to 64 GB of DDR2 ECC memory. This ensures data integrity and system stability, which are crucial in enterprise environments. The presence of ECC (Error-Correcting Code) memory allows these motherboards to automatically detect and correct data corruption, significantly reducing the risk of system crashes and data loss.

Storage capabilities are another highlight of the X6DH3-G2 and X6DHi-G2 motherboards. They come equipped with multiple SATA and SCSI interfaces, ensuring compatibility with various storage solutions. This flexibility allows users to configure their storage according to their specific needs, whether it be for high-speed access or large-capacity requirements. RAID (Redundant Array of Independent Disks) support is also integrated, enabling users to implement data redundancy and improve performance.

Networking features are robust, with integrated gigabit Ethernet that ensures high-speed connections and efficient data transfer. This is essential for applications demanding low latency and high bandwidth.

The layout of the X6DH3-G2 and X6DHi-G2 motherboards is designed for optimal thermal management and airflow, enhancing system longevity and reliability. They also support a range of expansion slots, including PCI Express, which allows for the addition of graphics cards and other advanced peripherals.

Super Micro’s commitment to quality is evident in these motherboards, showcasing reliability and a wealth of features that make them suitable for demanding enterprise environments. With a focus on performance, scalability, and stability, the X6DH3-G2 and X6DHi-G2 motherboards are engineered to meet the evolving challenges faced by IT professionals and organizations today.
Top Page Image Contents