Chapter 6: Rack Installation
Installing the Inner Rail Extension
The SC512F includes chassis ears that you must remove before installing the rails.
Removing the Chassis Ears
1.Locate and remove the three screws holding the chassis ear in place.
2.Repeat step on with the other chassis ear.
Flat head
M4 x 4 mm
[0.157]
Figure 6-2: Installing Inner Rails to the Chassis
Installing the Inner Rails
1.Place the inner rail on the side of the chassis aligning the hooks of the chas- sis with the rail holes.
2.Slide the rail toward the front of the chassis to secure the rail in place.
3.Secure the chassis with four screws.
4.Repeat steps