SUPER MICRO Computer X8SIL-F, X8SIL-V Security Settings, Supervisor Password, User Password

Page 89

X8SIL/X8SIL-F/X8SIL-V

4-4 Security Settings

The AMI BIOS provides a Supervisor and a User password. If you use both pass- words, the Supervisor password must be set first.

Supervisor Password

This item indicates if a supervisor password has been entered for the system. Clear means such a password has not been used and Set means a supervisor password has been entered for the system.

User Password:

This item indicates if a user password has been entered for the system. Clear means such a password has not been used and Set means a user password has been entered for the system.

Change Supervisor Password

Select this feature and press <Enter> to access the submenu, and then type in a new Supervisor Password.

User Access Level (Available when Supervisor Password is set as above) Available options are Full Access: grants full User read and write access to the

Setup Utility, View Only: allows access to the Setup Utility but the fields cannot be

changed, Limited: allows only limited fields to be changed such as Date and Time,

No Access: prevents User access to the Setup Utility.

Change User Password

Select this feature and press <Enter> to access the submenu , and then type in a new User Password.

4-22

Image 89
Contents X8SIL X8SIL-F X8SIL-V Page Conventions Used in the Manual About This Motherboard Manual OrganizationAsia-Pacific Contacting SupermicroEurope Table of Contents Troubleshooting Installing Drivers Introduction Main Setup Advanced Setup ConfigurationsOverview ChecklistMotherboard Image X8SIL-F Shown VGA Motherboard Layout111 121 131 141 151 Description Color/State Status X8SIL/X8SIL-F/X8SIL-V Headers/Connectors Number DescriptionMotherboard Features Devices USB Devices X8SIL-F/X8SIL-V Only Power ConfigurationKeyboard/Mouse Serial COM PortsOther DimensionsCD Utilities X8SIL/X8SIL-F/X8SIL-V System Block Diagram Block Diagram RoHS 6/6Chipset Overview Intel 3400/3420 Chipset FeaturesPC Health Monitoring Power Configuration SettingsSlow Blinking LED for Suspend-State Indicator Power SupplyBios Support for USB Keyboard Main Switch Override MechanismISCSI Support Super I/OOverview of the Nuvoton BMC Controller Unpacking PrecautionsStatic-Sensitive Devices Installing the LGA1156 Processor Processor and Heatsink InstallationPage Page Installing a Passive CPU Heatsink Removing the Heatsink Installing an Active Fan CPU Heatsink Page Active Heatsink Removal Memory Support Installing DDR3 MemoryDimm Installation Populated Any combination Per Channel Memory Population GuidelinesDDR3 ECC Registered Rdimm Memory Support To Remove Installing and Removing DIMMsPossible System Memory Allocation & Availability Location of Mounting Holes Motherboard InstallationTools Needed Installation Instructions Back Panel Connectors and IO Ports Connectors/IO PortsMouse ATX PS/2 Keyboard and PS/2 Mouse PortsKeyboard Keyboard Purple Mouse GreenDefinitions Universal Serial Bus USBNC No Connection LAN1 LAN2 Ipmi Dedicated LAN X8SIL- F only Ethernet PortsCOM1 COM2 Serial PortsVGA Video ConnectorFront Control Panel JF1 Header PinsFront Control Panel Pin Definitions Power LEDOH/Fan Fail Overheat OH/Fan FailReset Button PWR Button Reset ButtonPower Button ATX Main PWR & CPU PWR Connectors Connecting CablesRequired Pin ATX Main PWR Pin Processor PWRChassis Intrusion Fan HeadersSpeaker Internal BuzzerTPM Header Internal Buzzer Speaker Header TPM HeaderDOM PWR Connector Onboard Power LEDPower Supply I2C Connector Two T-SGPIO Serial-Link General Pur Sgpio 0/1 HeadersLAN Port Enable/Disable Jumper SettingsLAN Port 1 Enable B. LAN Port 2 Enable Explanation of JumpersClear Cmos JI2C1 JI2C2 PCI Slot SMB EnableCmos Clear VGA Enable Energy Saving Enable VGA EnableEnergy Saving Enable USB Wake-Up BMC EnableBP USB 0/1 Wake-up BMC Enable LAN 1/LAN 2 LEDs Onboard IndicatorsIpmi Dedicated LAN LEDs LAN PortUnsupported Memory LED Ipmi Heartbeat LED X8SIL-F OnlySata Connections Sata and Floppy Drive ConnectionsFloppy Floppy ConnectorP O R T a N T Note on X8SIL-F motherboards Before Power On Troubleshooting ProceduresNo Power No VideoLosing the System’s Setup Configuration Technical Support ProceduresMemory Errors Question What type of memory does my motherboard support? Frequently Asked QuestionsQuestion How do I update my BIOS? Question Whats on the CD that came with my motherboard? Page Battery Installation Battery Removal and InstallationBattery Removal Returning Merchandise for Service Page Introduction Starting Bios Setup UtilityHow To Change the Configuration Data How to Start the Setup Utility Main SetupSystem Memory System Time/System DateProcessor BOOT Feature Advanced Setup ConfigurationsPower Button Function Wait For F1 If ErrorRestore on AC Power Loss Hit Del Message DisplayProcessor & Clock Options Hardware Prefetcher Available when supported by the CPUCPU Ratio Clock Spread SpectrumIntel Eist Technology Active Processor CoresC1E Support Intel C-STATE TechAdvanced Chipset Control SATA / Floppy Configuration LBA/Large Mode IDE Detect Timeout secPIO Mode TypeA.R.T. For Hard disk drives DMA ModePCI/PnP Configuration Remote Access Configuration Super IO Device ConfigurationHardware Health Configuration CPU Temperature System TemperatureFan Speed Control Modes ACPI Configuration Trusted Computing IPMI Configuration X8SIL-F Only Event Log Configuration Intel TXT Initialization Intel TXT LT ConfigurationSupervisor Password Security SettingsUser Password Change Supervisor PasswordBoot Sector Virus Protection Boot SettingsBoot Device Priority Exit Options Retry Boot DevicesRemovable Drives CD/DVD DrivesLoad Fail-Safe Defaults Load Optimal DefaultsDiscard Changes and Exit Discard ChangesX8SIL/X8SIL-F/X8SIL-V Recoverable Post Error Beep Codes Appendix a Post Error Beep CodesPage Driver/Tool Installation Display Screen Installing DriversConfiguring SuperDoctor SuperDoctor III Interface Display Screen-II Remote Control Page Part 1 Boot Sector Recovery Process Recovery Process from a USB Device/Drive Recommended MethodPart 2 Bios Reprogramming Re-Flashing Recovery Process from an IDE/SATA Atapi Disc Drive
Related manuals
Manual 101 pages 31.8 Kb

X8SIL-V, X8SIL-F, X8SIL specifications

SUPER MICRO Computer X8SIL, X8SIL-F, and X8SIL-V are advanced server motherboards designed to meet the demanding needs of today's data centers and enterprise environments. These motherboards from Supermicro deliver exceptional performance, scalability, and reliability, making them suitable for a wide range of applications, including virtualization, cloud computing, and database management.

One of the main features of the X8SIL series is its compatibility with Intel's Xeon 5500 and 5600 series processors. This allows users to harness the power of multi-core technology, ensuring optimal performance for both single-threaded and multi-threaded applications. With support for up to 144GB of DDR3 ECC memory, the X8SIL motherboards provide ample memory bandwidth, enhancing the overall system performance and efficiency.

The X8SIL-F variant includes an integrated IPMI (Intelligent Platform Management Interface) feature, which enables remote management and monitoring of the system. This technology allows IT administrators to proactively manage server health, perform remote troubleshooting, and ensure minimal downtime. Additionally, the X8SIL-F supports Supermicro's Green Computing technology, which helps reduce power consumption and enhance energy efficiency, leading to lower operational costs.

In terms of storage, the X8SIL series offers multiple SATA and SAS interface options, facilitating a wide range of storage configurations. The motherboards feature six SATA II ports and optional SAS capabilities, allowing users to implement RAID setups for improved performance and data redundancy. This flexibility in storage solutions is crucial for environments that require high availability and reliability.

The X8SIL motherboard series is equipped with a range of I/O ports, including multiple USB ports, PCI Express slots, and Gigabit Ethernet interfaces. This extensive connectivity ensures that users can easily expand and customize their systems according to specific application needs. The onboard Gigabit Ethernet ports provide fast network access, which is essential for data-intensive workloads.

Furthermore, the X8SIL, X8SIL-F, and X8SIL-V boast an efficient thermal design. These motherboards feature robust heat sinks and fan headers, which help maintain optimal operating temperatures, even under heavy workloads. This thermal efficiency is critical in extending the lifespan of components and ensuring consistent performance.

In summary, SUPER MICRO Computer's X8SIL, X8SIL-F, and X8SIL-V motherboards stand out with their strong performance, advanced management features, flexible storage options, and efficient thermal design. These characteristics make them ideal choices for businesses looking to build reliable and scalable data center solutions.