SUPER MICRO Computer AOC-USAS-L4iR manual Physical/Logical View Panel

Page 45

Safety Information and Technical Specifications

Physical/Logical View Panel

The left panel of the MegaRAID Storage Manager window displays either the Physical view or the Logical view of the system and the devices in it, depending on which tab is selected.

The Physical view shows the hierarchy of physical devices in the system. At the top of the hierarchy is the system itself. One or more controllers are installed in the system. Each controller has one or more ports. Disk drives and other devices are attached to the ports.

The Logical view shows the hierarchy of controllers, virtual disks, and disk groups that are defined on the system. (Physical drives also appear in the Logical view, so you can see which physical drives are used by each virtual disk.)

The following icons in the left panel represent the controllers, disk drives, and other devices:

System

Controller

Port

Array

Virtual disk

Physical drive

A red circle to the right of an icon indicates that the device has failed.

A yellow circle to the right of an icon indicates that a device is running in a de- graded state.

5-5

Image 45
Contents AOC-USAS-L4i AOC-USAS-L4iR Manual Revision 1.0b Release Date October 17 Table of Contents MegaRAID Storage Manager SoftwareOverview and Installation Adding a Saved Storage Configuration Add-on Card Users Guide Overview Product FeaturesOperating Systems Supported An Important Note to UsersHeadquarters Contacting SuperMicroEurope Asia-PacificESD Safety Guidelines General Safety GuidelinesAn Important Note to Users Add-on Card Users Guide Front Connectors Front Connectors and Jumpers#1. Internal SAS Connector Front Connector and Pin DefinitionsFront Jumper Locations and Pin Definitions Jumper SettingsFront Pane LEDs LED IndicatorsRAID 1 Arrays RAID Minimum Drive RequirementsAdd-on Card Users Guide Performing a Quick Configuration Chapter Driver InstallationConfiguring Arrays and Logic Drives Starting the MegaRAID Bios CUUsing Easy Configuration Logical Drive Configuration Using New Configuration and View/Add ConfigurationSafety Information and Technical Specifications Creating a Global Hotspare Drive Initializing Logical Drives Logical Drive Submenu Setting the Hard Disk Write Cache and Read Ahead Policies Rebuilding a Drive Hot Plug Support Checking Data Consistency Viewing and Changing Device Properties Viewing and Changing Adapter Properties Forcing Drives Online or Offline Viewing and Changing Logical Drive PropertiesViewing Physical Drive Properties Configuring a Bootable Logical Drive Deleting a Logical DriveClearing a Storage Configuration Creating Storage Configurations OverviewHardware and Software Requirements Monitoring Storage DevicesMaintaining Storage Configurations Installation Customer Information Screen Customer Information Screen Installing MegaRAID Storage Manager Software for Linux Linux Error Messages Add-on Card Users Guide Starting MegaRAID Storage Manager Software Chapter MegaRAID Storage Manager Window and Menus Select Server Window Select Server Window MegaRAID Storage Manager Window Physical/Logical View Panel Event Log Panel Properties/Operations/Graphical View PanelFile Menu Menu BarLog Menu Creating a New Storage Configuration Chapter ConfigurationFirst Screen Configuration Wizard Understanding Virtual Disk Parameters Auto Configuration Screen Using Auto ConfigurationUsing Guided Configuration First Guided Conguration Screen Second Guided Configuration Screen Manual Configuration First Manual Configuration Screen Using Manual Configuration RAIDManual Configuration Defining a Virtual Disk Manual Configuration Adding a Hotspare Safety Information and Technical Specifications Using Manual Configuration RAID Using Manual Configuration RAID Adding Hotspare Disks Changing Adjustable Task Rates Deleting a Virtual Disk Changing Virtual Disk PropertiesClearing a Storage Configuration from a Controller Saving a Storage Configuration to DiskAdding a Saved Storage Configuration