Configuring a Static IP Address on Windows
Complete the following steps to configure your management computer with a static IP address:
Windows 7
1.Open a My Computer window.
2.Type Network Connections into the location bar at the top of the window and press Enter.
The window changes to the Control Panel > All Control Panel Items > Network Connections folder.
3.In the Network Connections window,
4.If the Local Area Connection Status window opens, click the Properties button.
5.In the Local Area Connection Properties window, select Internet Protocol Version 4 (TCP/IPv4), and then click the Properties button.
6.Select Use the following IP address and type an IP address on the 192.168.168.0/24 subnet, such as 192.168.168.50, in the IP address field.
7.Type 255.255.255.0 in the Subnet Mask field.
8.Click OK in the Properties window.
9.Click Close in the Local Area Connection Properties window for the settings to take effect.
Windows XP
1.On the Windows Start menu, highlight Connect To and then select Show All Connections to open the Network Connections window.
If Connect To is not available, directly select Network Connections, or select Control Panel and then double- click Network Connections in the Control Panel window.
2.In the Network Connections window,
3.In the Local Area Connection Status window, click the Properties button.
4.In the Local Area Connection Properties window, select Internet Protocol (TCP/IP), and then click the Properties button.
5.Select Use the following IP address and type an IP address on the 192.168.168.0/24 subnet, such as 192.168.168.50, in the IP address field.
6.Type 255.255.255.0 in the Subnet Mask field.
7.Click OK in the Properties window.
8.Click Close or OK in the Local Area Connection Properties window for the settings to take effect.
Page 14 Powering On and Connecting to the Appliance