SonicWALL CDP 6080B manual Configuring Mail Settings

Configuring Mail Settings

Mail settings are required for the administrator to receive email alerts. The Alerts tab already contains default alert settings.

Note: You must complete the network configuration of the appliance and physically connect it to your local area network to allow mail settings to work properly.

1.Log in to a management computer that is connected to a network device on your local network.

2.Point your browser to the static IP address of the SonicWALL CDP appliance. The CDP login screen displays.

3.Log in as admin, using the configured administrator password.

4.On the System > Settings page, click the Mail tab.

5.Complete the fields as described in the table below:

Field	Description
Server	Type in the name or IP address of the mail
	server; for example, mail.company.com.
Recipient	Type in the email address of the administrator
Email	for the SonicWALL CDP appliance.
Address
From Email	Type in the email address to use as the sender
Address	when alert emails are sent to the administrator;
	for example, appliance_name@company.com.
From Email	Type in the domain used by the sender; for
Domain	example, localdomain or a regional domain.
Username	Type in a user name for the From Email
	Address, if required by your mail server.
Password	Type in a password for the From Email
	Address, if required by your mail server.
Verify	Re-enter the password.
Password

6.Click Apply.

7.Click Send Test Email to send a test email to the configured Recipient Email Address.

SonicWALL CDP 6080 / 6080B Getting Started Guide Page 19