Konica Minolta manual Configuring KP Sample Configuration

Configuring KP

Sample Configuration

Since KP is fully customizable, the exact configuration will differ based upon which Konica printer you are using. The following are detailed, step-by-step instructions on how to configure a Konica 7065 Workgroup Document System for use with KP. The Konica 7065 has many popular features that are available on other Konica printers. The fundamental processes for configuring these features within KP is the same for all Konica printers.

!IMPORTANT: This sample is intended solely as a guide, from which you may learn the basis for configuration.

The configuration in this sample is based upon a Konica 7065 Workgroup Document System with an FS-106 Finisher, an LT-352 large capacity tray, 32 MB ERDH and an IP-303 Print Controller with 64 MB of RAM.

!IMPORTANT:

!IMPORTANT:

At any point during your use of KP or kpconfig, you may

type Ctrl-C to cancel the settings you have made and return to the shell prompt. If you feel you have entered an incorrect selection, type Ctrl-C to exit.

kpconfig will prompt you only for the options available for the printer that you specify during installation.

Konica Print Utility 12