Konica Minolta KP manual # ./ kpconfig -a

Configuring KP

Sample Configuration (Continued)

1.Begin configuration with the kpconfig command. Typing -aafter the

kpconfig command will produce a list of printers available on your platform that you may configure.

#./ kpconfig -a

2.Choose the printer you would like to configure from the list provided by entering the number preceding the printer name.

Printer choices

1.Konica7050

2.k7065

Enter selection number for Printer: 2

!IMPORTANT: The kpconfig command assumes that you have already installed your printer. kpconfig is for currently existing system printers only. If you do not see your printer in the printer choices list, refer to the readme.txt file for your specific Unix/Linux distribution for instructions on how to add a system printer.

3.The following list of available PPD files will appear. Please refer to page 8 for a complete list of the available kp PPD files.

Installed PPD files

1./etc/lp/ppd/7033-INT.ppd

2./etc/lp/ppd/7033-US.ppd

3./etc/lp/ppd/7040-INT.ppd

4./etc/lp/ppd/7040-US.ppd

5./etc/lp/ppd/70502-US.ppd

6./etc/lp/ppd/70502INT.ppd

7./etc/lp/ppd/7060-INT.ppd

8./etc/lp/ppd/7060-US.ppd

9./etc/lp/ppd/7065-INT.ppd

10./etc/lp/ppd/7065-US.ppd

11./etc/lp/ppd/Ko30465u.ppd

12./etc/lp/ppd/Ko42120u.ppd

13./etc/lp/ppd/Ko43145u.ppd

14./etc/lp/ppd/Ko601751.ppd

Enter selection number for PPD file: 10

In this case, since we are using a Konica 7065 system and require US paper measure ments, the selection needed is 10.

Konica Print Utility 13