Konica Minolta KP manual Completing Your Configuration, Rations established for each printer

Configuring KP

Sample Configuration (Continued)

7.Sheet Feeder. You will be asked what type of sheet feeder you have installed on your Konica system.

Sheet Feeder choices

1.None (default)

2.PI-108

Enter selection number for Sheet Feeder [1]: 1

In this case, we do not have a sheet feeder installed, so the proper entry is 1.

8.Large Capacity Tray. You will be asked whether you have a Large Capacity Tray installed on your Konica system.

Large Capacity Tray choices

1.Not Installed (default)

2.Installed

Enter selection number for Large Capacity Tray [1]: 2

In this case, we have an LT-352 large capacity tray installed, so the proper entry is 2.

9.Tandem Configuration. You will be asked if you have tandem configuration installed on your Konica system. Tandem configuration refers to the connection of two or more Konica printing systems to increase speed and provide job redundancy.

Tandem Configuration choices

1.Not Installed (default)

2.Installed

Enter selection number for Tandem Configuration [1]:1

In this case, we do not have tandem installed, so the proper entry is 1.

Completing Your Configuration

Completing step 9 will return you to the shell prompt. When you are returned to the shell prompt, configuration is complete.

If you believe that you have made a mistake when installing or configuring your printer, use the following commands:

./	kpconfig	-l		Lists all printers configured for KP and the configu
				rations established for each printer.
./	kpconfig	-d	[printer name]	Deletes a printer configuration from your system, so
				that you may and reconfigure your system.

Konica Print Utility 15