ZyXEL Communications Prestige100 Configuring a Filter Set, 2 Menu 21 - Filter Set Configuration

Configuring a Filter Set

In order to distinguish between the 12 filter sets, each filter set should have a name or some comments. You can edit these comments in the following way.

1.From the Main Menu, select option ‘21. Filter Set Configuration’. This will bring you to ‘Menu 21 - Filter Set Configuration’.

2.From this menu, you can choose from among the twelve filter sets. Select the filter set you wish to configure (1-12).

This will bring you to the Edit Comments field. Whatever the comments are for that filter set will be displayed in this field. You can edit the comments you wish to use to identify that filter set.

Once you have completed filling in the Edit Comments field, press ENTER at the message: ‘Press ENTER to Confirm ...’ to confirm your selections, or press ESC at any time to cancel your selections. The new information will now be displayed in the read-only section of ‘Menu 21 - Filter Set Configuration’ as shown below:

Figure 8-2 Menu 21 - Filter Set Configuration

Once you press ENTER, you will be taken to ‘Menu - 21.1 - Filter Rules Summary’ as seen below. The information displayed in this

Filter Configuration 79