ZyXEL Communications Prestige100 user manual Menu 13 Default Dial-in Setup

Figure 6-3 Menu 13 - Default Dial-in Setup

From the Main Menu, enter ‘13’ to go to ‘Menu 13 - Default Dial- in Setup’. This section will describe how to configure the protocol- independent fields in this menu. For the protocol-dependent fields, please refer to the appropriate chapters.

1.Telco Options: CLID Authen. - This field sets the CLID authentication parameter for all incoming calls. There are three options for this field:

∙None - No CLID is required.

∙Required - Must provide CLID, or call is disconnected.

∙Preferred - If the CLID is available then CLID will be used to do authentication. If the CLID is not available the call will continue.

2.PPP Options: Recv. Authen. - This field sets the authentication protocol used for incoming calls. User names and passwords are configured in the next section (Remote users/Dial-in Users Setup). Options for this field are:

∙CHAP/PAP - Prestige will try CHAP first, but PAP will be used if CHAP is not available.

∙CHAP - use CHAP only.

62 Dial-In Configuration