ZyXEL Communications Prestige100 user manual Configuring a Filter Rule, TCP/IP Filter Rule

Configuring a Filter Rule

There are four types of filter rules that you can configure. Some of the parameters will differ depending on the type of rule. When you first enter the filter rule menu, you will be presented with ‘Menu

21.1.1- TCP/IP Filter Rule’. If you wish to configure another type of filter rule, you need to select the appropriate type (by pressing SPACE bar) under the Filter Type field and press ENTER. This will bring you to the corresponding menu.

TCP/IP Filter Rule

This section will show you how to configure a TCP/IP filter rule for your Prestige. The fields in the menu are indicated in bold type.

Figure 8-4 Menu 21.1.1 - TCP/IP Filter Rule

1.Active - In this field, you can make the filter rule active or inactive. There are two options:

∙Yes.

∙No.

2.IP Protocol - Protocol refers to the IP specific number of the protocol. The range for this value should be between 0 and 255. For example, ‘6’ refers to the TCP protocol.

82 Filter Configuration