6.My Password - Enter the password associated with the login name above. Please note that this login name/password pair is only for the Prestige to connect to the ISP’s gateway. When you use TCP/IP applications, e.g., FTP, to access the Internet from your workstation, you will need a separate login name and password for each server.
7.Single User Account - Please see the following section for a more detailed discussion on the Single User Account feature. The default is ‘No’.
8.Telco Options: Transfer Rate - This field (which only applies to outgoing calls) controls the rate at which the data is transferred between your Prestige and the Internet. There are four options for this field:
∙64K - The Prestige will place 64Kbps (bits per second) digital data calls.
∙56K - (For the North America only) The Prestige will place 56Kbps digital data calls.
∙DOVBS - (For the North America only) The Prestige will place 56Kbps Data Over Voice Bearer Service (DOVBS) call. Some phone companies in North America charge less if calls are made using DOVBS.
9.Press ENTER at the message: ‘Press ENTER to Confirm ...’ to confirm your selections, or press ESC at any time to cancel your selections.
10.At this point, the SMT will ask if you wish to test the Internet connection. If you select ‘Yes’, the Prestige will call the ISP to test the Internet connection. If the test fails, please note the error message that you receive and take the appropriate troubleshooting steps.
