Remote Node using the Primary Phone number first. If the Primary Phone number is busy or does not answer, the Prestige will call the Secondary Phone number if available. Once connected, the Prestige will use the BACP (Bandwidth Allocation Control Protocol) to establish the second
12.Route - This fields determines the protocols that the Prestige will route. The choices for this field are determined by the features enabled on your Prestige.
13.Edit PPP Options - To edit the PPP options for this Remote Node, move the cursor to this field, use the space bar to select ‘Yes’ and press ENTER. This will bring you to ‘Menu 11.2 - Remote Node PPP Options’ For more information on configuring PPP options, please see the section ‘Editing PPP Options’.
14.IP Addr - This is a required field if Route is set to ‘IP’. Enter the IP address of this Remote Node.
15.Edit IP - To edit the parameters of the protocols, go to this field, select ‘Yes’ and press ENTER. This will bring you to ‘Menu 11.3 - Remote Node Network Layer Options. For more information on filling out this screen, please refer to the chapter on TCP/IP protocol.
16.Telco Options: Transfer Rate - This field (which only applies to outgoing calls) controls the rate at which the data is transferred between your Prestige and the Remote Node. There are four options for this field:
∙64K - The Prestige will place 64Kbps (bits per second) digital data calls.
∙56K - (For North America only) The Prestige will place 56Kbps digital data calls.
