∙DOVBS - (For North America only) The Prestige will place 56Kbps Data Over Voice Bearer Service (DOVBS) call. Some phone companies in North America charge less if calls are made with DOVBS option.
17.Telco Options: Allocated Budget (min) - This field will set a ‘budget’ outgoing call time for the Remote Node. The default for this field is 0 for no budget control.
18.Telco Options: Period (hr) - This field will set the time interval to reset the above outgoing call budget control.
19.Session Option: Input Filter Sets, Output Filter Sets and Call Filter Sets - In these fields, select which filter set(s) you would like to implement to filter the incoming and outgoing traffic between this Remote Node and the Prestige. You can choose from 12 different filter sets. In addition, you can link up to 4 filter sets together for further customization (e.g., ‘1, 5, 9, 12’). Please note that spaces and ‘,’ are accepted in this field.
For more information on customizing your filter sets, please see Chapter 8. The default is blank, i.e., no filters defined.
20.Session Option: Idle Timeout (sec) - This value specifies the number of idle seconds that elapses before the Remote Node is automatically disconnected. Idle seconds is the period of time where no data is passed between the Remote Node and your Prestige. Administrative packets such as RIP are not counted as data. The default is 300 seconds (5 minutes).
Once you have completed filling in ‘Menu 11.1 - Remote Node Profile’, press ENTER at the message: ‘Press ENTER to Confirm
...’ to confirm your selections, or press ESC at any time to cancel your selections.
