Adapter 1 call when there is a match for the A/B Adapter 1 subaddress. Or it will be answered as A/B Adapter 2 call when there is a match for the A/B Adapter 2 subaddress. If A/B Adapter 1 or 2 subaddress is specified, then the analog call will not be answered. This option is only available for DSS1.
∙Don’t care - all numbers accepted - All digital calls, including global calls (without CDPN and CDSA in the call setup), to any CDPN (Called Party Number) will be answered. All analog calls will be routed to the A/B Adapter 1, A/B Adapter 2, or not answered. This depends on the setting of ‘Analog Call Routing’. All global analog calls will either accept or not answer them depending on the setting of ‘Global Analog Call’.
9.Analog Call Routing - All analog calls will be routed to the A/B Adapter 1 if the setting is ‘A/B Adapter 1’. Or they will be routed to the A/B Adapter 2 if the setting is ‘A/B Adapter 2’. Or they will not be answered if the setting is ‘Ignore’.
10.Global Analog Call - All global analog calls will be answered and routed to the A/B Adapter 1 or A/B Adapter 2 (the setting in the filed of ‘Analog call routing’) if the setting is ‘Accept’.
Or they will not be answered if the setting is ‘Ignore’.
When you are finished, press ENTER at the message: ‘Press ENTER to Confirm ...’ to save your selections, or press ESC to cancel. When you press ENTER, the Prestige will use the information that you entered to initialize the ISDN link to the telephone company switch. It should be noted that whenever the switch type is changed, the ISDN initialization will take slightly longer. In addition, if you are using the
At this point, the Prestige will ask if you wish to test to check if your ISDN line has been successfully connected to your Prestige. If you select ‘Yes’, The Prestige will perform a
