operation of the Prestige, even though it is still kept in the database, and can be activated in the future. Deactivated nodes are displayed with a - (minus sign) at the beginning of the name in Menu 11.
3.Call Direction - If this parameter is set to ‘Both’, the Prestige can both place and receive calls to/from this Remote Node. If set to ‘Incoming’, the Prestige will not place a call to this Remote Node. If set to ‘Outgoing’, the Prestige will drop any call from this Remote Node.
Several other fields in this menu depend on this parameter. For example, in order to enable Call Back, the Call Direction must be ‘Both’.
4.Incoming: Rem Node Login Name - Enter the login name that this Remote Node will use when it calls into the Prestige. The login name in this field combined with the Rem Node Password will be used to authenticate the incoming calls from this node.
5.Incoming: Rem Node Password - Enter the password used when this Remote Node calls into the Prestige.
6.Incoming: Rem CLID - This field is active only if Call Direction is either ‘Both’ or ‘Incoming’. Otherwise, an ‘N/A’ appears in the field. This is the Calling Line ID (the telephone number of the calling party) of this Remote Node. If you enable the CLID Authen field in ‘Menu 13 - Default Dial In’, the Prestige will check this number against the CLID in the incoming call. If they do not match and the CLID Authen is ‘Required’, then the Prestige will reject the call.
7.Incoming: Call Back - This field will be valid only if Call Direction is ‘Both’. Otherwise, an ‘N/A’ appears in the field. This field determines whether or not you wish the Prestige to call back after receiving a call from this Remote Node. If this option is enabled, the Prestige will disconnect the initial call
Remote Node Configuration 51
