ISDN: LNK - This LED indicates that the Prestige has an ISDN line connected to the WAN interface and it has been successfully initialized.
ISDN: B1 and B2 - These LEDs are on if there is an active WAN session on that channel or if that channel is making or receiving a call.
ETHERNET: LNK - This LED indicates that the Prestige has been successfully connected to the LAN via a UTP Ethernet interface.
ETHERNET: TX and RX - Transmit and Receive LEDs will blink to indicate when there is traffic over the LAN.
ETHERNET: COL - This LED indicates that there is transmission collision over the LAN
PHONE: 1 - This LED indicates the functionality of the POTS port 1 on the Prestige. If there is a device plugged into this port, and the device is in use, this LED should be on.
PHONE: 2 - This LED indicates the functionality of the POTS port 2 on the Prestige. If there is a device plugged into this port, and the device is in use, this LED should be on.
Powering On Your Prestige
When you power on your Prestige, the Prestige will perform several internal tests and will also do an ISDN line initialization. After this initialization, the Prestige will ask you to press ENTER to continue as shown below:
Installation 25
