5.WAN Network Mode - The second WAN network mode screen configures your WAN settings for the selection you made in the previous screen.
Static IP
The Setup Wizard screen should display:
WAN Network Mode: NAT Enabled (Static IP)
SonicWALL WAN IP | Enter a single, static IP address. This must be in the |
Address | address range assigned to you by your ISP. |
|
|
WAN Subnet Mask | Enter the subnet mask for your network, provided by your |
| ISP. For example, 255.255.255.0. |
|
|
Gateway (Router) | Enter the IP address of your Internet gateway, provided by |
Address | your ISP. |
|
|
DNS Server Address | Enter the IP address of the DNS server for your network, |
| provided by your ISP. |
|
|
DNS Server Address | You can enter a secondary, |
#2 (optional) | the first one fails. |
|
|
Click Next.
DHCP
The Setup Wizard screen should display:
WAN Network Mode: NAT with DHCP Client
If you selected DHCP, you do not need to enter any WAN networking settings. The network settings are provisioned automatically from a DHCP server.
Click Next.
Page 12