SonicWALL TZ 170 manual Windows NT, Select Specify an IP Address

Page 31

Windows NT

1.From the Start menu, highlight Settings and then select Control Panel.

2.Open Network.

3.Double-click TCP/IP in the TCP/IP Properties window.

4.Select Specify an IP Address.

5.Type an IP address from your LAN IP range in the IP Address field.

6.Type 255.255.255.0 in the Subnet Mask field.

7.Type the SonicWALL TZ 170 Wireless LAN IP Address in the Default Gateway field.

8.Click DNS at the top of the window.

9.Type the DNS IP address in the Preferred DNS Server field. If you have more than one address, enter the second one in the Alternate DNS server field.

10.Click OK, and then click OK again.

11.Restart the computer for changes to take effect.

Windows 98

1.In the Start menu, select Settings and then select Control Panel.

2.Open Network.

3.Double-click TCP/IP in the TCP/IP Properties window.

4.Select Specify an IP Address.

5.Type an IP address from your LAN IP range in the IP Address field.

6.Type 255.255.255.0 in the Subnet Mask field.

7.Type the SonicWALL TZ 170 Wireless LAN IP Address in the Default Gateway field.

8.Click DNS Configuration.

9.Type the DNS IP address in the Preferred DNS Server field. If you have more than one address, type the second one in the Alternate DNS server field.

10.Click OK, and then click OK again.

11.Restart the computer for changes to take effect.

Page 30

Image 31

Contents SonicWALL TZ 170 Wireless Getting Started Guide Before You Begin Check Package ContentsAny Items Missing? SonicWALL TZ 170 Wireless Front and Back Panels Overview What You Need to Begin SonicWALLTZ 170 Wireless Configuration StepsCollecting Required Information Internet Service Provider ISP InformationOther Information Installing the Antennas Setting Up the SonicWALL TZAdjusting the Antennas Applying Power LAN port #1 Connecting the SonicWALLTZ 170 WirelessConnecting the WAN Cable to the Internet Connecting the LAN Cable to Your Management StationAccessing the Management Interface If the SonicWALL Setup Wizard Does Not Appear Configuring the SonicWALLTZ 170 Wireless Using the SonicWALL Setup WizardSelect Office Gateway and click Next Dhcp WAN Network Mode NAT with Dhcp Client WAN Network Mode NAT Enabled Static IPWAN Network Mode NAT with Pptp Client WAN Network Mode NAT with PPPoE ClientEnable Dhcp Server Ssid Enable Wireless Guest Restart your Management Station Testing Your ConnectionEnter a Host Name in your WAN Dhcp Settings Run the Setup WizardBefore You Register Registering Your SonicWALLTZ 170 WirelessSonicWALL TZ 170 Wireless Getting Started Guide Registering Your SonicWALLTZ 170 Wireless Activate the SonicWALL Security Services Activating SonicWALL Security ServicesCongratulations Enabling Network Anti-Virus Service Enabling Premium Content Filtering ServiceEnabling Intrusion Prevention Service Enabling Anti-Spyware Service Enabling Gateway Anti-Virus ServiceConnecting to the Wireless Network Connecting Wireless Clients to SonicWALLTZ 170 WirelessEstablishing Secure Wireless Connections Open the SonicWALL Global VPN Client folder Launch setup.exePage Configuring Computers for Your Network with Dhcp Connecting Computers to Your 10 SonicWALLTZ 170 WirelessOpen Network and Dial-up Connections Windows XPWindows Windows NTType 255.255.255.0 in the Subnet Mask field Static IPType 255.255.255.0 in the Subnet field Select Specify an IP Address Windows NTGlossary of Networking Terms Page North American Authorized Channels Power Supply Information Models APL14-034Lithium Battery Warning Considerations for Mounting the APL14-034Wall Mounting the SonicWALLTZ 170 Wireless Mounting the SonicWALLTZ 170 WirelessSonicWALL TZ 170 Wireless Getting Started Guide Mounting Models the SonicWALL TZ 170 Wireless on the Ceiling SonicWALL TZ 170 Wireless Getting Started Guide Snap the SonicWALL TZ 170 Wireless onto the mounting plate Trademarks Copyright NoticePage 232-000789-00 Rev a 06/05

Related manuals

Manual 13 pages 61.54 Kb