PPPoE
The Setup Wizard screen should display:
WAN Network Mode - NAT with PPPoE Client
Obtain an IP Address | Select this if your ISP assigns you a dynamic IP address. |
Automatically |
|
|
|
Use the following | Select this if your ISP has assigned you a static IP address, |
IP Address | and enter the address. |
|
|
PPPoE User Name | Enter the user name for your Internet account. Your ISP may |
| require you to enter your username in |
| including “@” and the domain name, for example, |
| joe.user@sonicwall.com. |
|
|
PPPoE Password | Enter the password for your Internet account. |
|
|
Inactivity Disconnect | Check this box if you want the SonicWALL TZ 170 Wireless |
(minutes) | to disconnect from the Internet if there is no traffic for the |
| number of minutes you enter. |
|
|
Click Next.
PPTP
The Setup Wizard screen should display:
WAN Network Mode - NAT with PPTP Client
PPTP Server IP | Enter the address of the PPTP server. |
Address |
|
|
|
PPTP User Name | Enter your network user name. |
|
|
PPTP Password | Enter your network password. |
|
|
Obtain an IP Address | Select this if the server assigns you a dynamic IP address. |
Automatically |
|
|
|
Use the following | Check this if you have been given a static IP address, and fill |
IP Address | in the following three fields. |
|
|
SonicWALL WAN | Enter the static IP address for your connection. |
IP Address |
|
|
|
WAN Subnet Mask | Enter the subnet mask for your connection. |
|
|
Gateway (Router) | Enter the address of your Internet Gateway. |
Address |
|
|
|
Click Next.
SonicWALL TZ 170 Wireless Getting Started Guide | Page 13 |