StorCase Technology DX115 Packaging Information, Serial Numbers, Receiving Frame Device Carrier

Page 8

Introduction

1

INTRODUCTION

Packaging Information

The StorCase Technology Data Express® system is shipped in a container designed to provide protection and prevent damage during shipment. The Data Express unit was carefully inspected before and during the packing procedure at the factory. Bent or broken connectors, or evidence of other damage to the Data Express should be reported to the shipper immediately. Refer to Figure 1 for the package contents.

If the wrong Data Express model has been received, please call your reseller or StorCase at

(800)435-0642 to arrange for a Return Material Authorization (RMA). StorCase cannot ac- cept returns which do not display an RMA number on the outside of the package. Return the unit with all the original packing materials.

Before removing any component from its packaging, discharge any static electricity by touching a properly grounded metal object.

Serial Numbers

Both the SATA 3Gbps DX115 receiving frame and carrier are labeled with serial numbers. These numbers must be reported to the StorCase Customer Service Representative in order to receive a Return Material Authorization (RMA) for warranty claims. Locate the serial number labels and record the numbers in the spaces provided below.

Receiving Frame:

Device Carrier:

DX115 for Backup User's Guide - Rev. A01

StorCase Technology, Inc.

Image 8
Contents Data Express DX115 for Backup Fax 714 Part No. D89-0000-0306 A01 JuneStorCase Technology, Inc Newhope Street Fountain Valley, CA Limited Warranty Duration of WarrantyWarranty Claim Requirements Free Technical SupportDeclaration of Conformity Table of Contents List of Figures Sata 3Gbps DX115 Receiving Frame and CarrierReceiving Frame Device Carrier Packaging InformationSerial Numbers Package Contents General Description Sata 3Gbps DX115 Receiving Frame and CarrierFront Panel Front PanelDrive Ready Blue Power Switch contdError Red Receiving Frame Rear Panel FanInstalling the Drive into the Drive Carrier PreparationDrive Installation Assembly Drive Cover Installation Installing the Receiving Frame Receiving Frame Mounting HolesDrive Activity LED Drive Hot Swap Data Backup and Restoration Replacing the Cooling Fan Removing the Cooling FanAppendices Appendix a Specifications/Dimensions Specifications and dimensions below are for reference onlyReceiving Frame with Carrier Installed Appendix B Optional Accessories Carrying CaseReaders Comments Business Reply Mail